All Products

Sit at a ride height of 10.5" by utilizing a flat wire spring coupled with a progressive rate main spring, built around a high-pressure gas-charged 11.5" damper. Provides more travel than most lowered shocks.

Stubby 10.5" eye-to-eye measurement shocks for Honda CMX Rebel. Preload-adjustable to tune to rider weight. Made in the U.S.A. Made famous by the Burly Slammer Suspension Kit but now available on their own. Stubby 10.5" eye-to-eye measurement shocks for Honda CMX Rebel. Preload-adjustable to tune to rider weight. Made in the U.S.A. Made famous by...

Made famous by the Burly Slammer Suspension Kit. Stubby 10.5" eye-to-eye measurement. Preload-adjustable to tune to rider weight.

Complete lowering kit for Honda CMX1100 Rebel. Includes 10.5" shocks with springs and covers, and fork springs. Easy-to-install fork springs that do not require the removal of forks. Drop-in fork springs lower front end up to 2", and shocks lower rear up to 2½". Complete lowering kit for Honda CMX1100 Rebel. Includes 10.5" shocks with springs and...

A perfect match to Slash Cut accessories for the Honda Rebel, this lever features steel construction that has been powdercoated black and a billet aluminum toe peg with a black anodized finish. Sold each. A perfect match to Slash Cut accessories for the Honda Rebel, this lever features steel construction that has been powdercoated black and a...

Replace your plain and flimsy stock chain guard with a more sturdy and stylish unit. Made from durable aluminum with slash-cut windows and powdercoated in a textured black finish. Replace your plain and flimsy stock chain guard with a more sturdy and stylish unit. Made from durable aluminum with slash-cut windows and powdercoated in a textured...

Machined from billet aluminum with a traction rubber sleeve. These stylish and comfortable pegs mount directly to the stock Honda Rebel clevis. Sold in pairs.

Replaces stock sprocket cover, adding a slash window design to the left side of the Rebel engine. Made from sturdy aluminum and powdercoated black. Matches perfectly with other Slash Cut accessories. Replaces stock sprocket cover, adding a slash window design to the left side of the Rebel engine. Made from sturdy aluminum and powdercoated black....

Add style and comfort. CNC machined from light billet aluminum and wrapped with a rubber sleeve to absorb vibration and increase grip. Laser-engraved grip ends for added style. Sold in pairs. Add style and comfort. CNC machined from light billet aluminum and wrapped with a rubber sleeve to absorb vibration and increase grip. Laser-engraved grip...

Upgrade the stock plastic rear brake reservoir cover with a stylish, durable unit formed from sturdy steel. Features slash-cut windows and a textured black powdercoat finish. Includes hardware for easy, bolt-on installation. Upgrade the stock plastic rear brake reservoir cover with a stylish, durable unit formed from sturdy steel. Features...

Perfect match to Slash Cut accessories for the Honda Rebel. Steel construction that has been powdercoated black. Toe peg is billet aluminum with a black anodized finish. Sold each. Perfect match to Slash Cut accessories for the Honda Rebel. Steel construction that has been powdercoated black. Toe peg is billet aluminum with a black anodized...

Relocate and replace the bulky license plate mount and turn signals/brake light to bring them in tighter to the motorcycle. Made from sturdy, 12-gauge stamped steel, it features bright LED lights and slash-cut windows in a textured black powdercoat finish. Includes all hardware for a direct, bolt-on installation. Relocate and replace the bulky...

Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made from 12-gauge stamped steel with slash-cut windows and includes mounting hardware for direct bolt-on installation. Clean up the tail of the Honda Rebel with this side-mount, dual-function, run/brake LED design. The bracket is made...

Ride rebellious while protecting your bike. Each slider is made from durable Derlin that is shatterproof and allows the bike to slide rather than digging in and flipping while also protecting the bike from road rash. Front sliders mount through the front chassis while the rears mount to the upper shock mount. Direct, bolt-on design for easy...

Dual-spring, high-performance damper. Main spring coil absorbs big hits and prevents bottoming, while the secondary coil smooths out minor road imperfections. Provides a plush ride that’s not afraid to play rough. May require modification to exhaust brackets for adequate belt clearance. Sold in pairs. Made in the U.S.A.

Versatile bags that mount to metal gas tanks using high-strength magnets or to the tail section with D-ring anchor points. Features a clear, stretchable map/accessory screen for smartphones or GPS units, two exterior zipper pockets, and a large main compartment. Includes a pass-through port for charging or headphone cords and a built-in carry...

Saddlebags featuring leather paneling, a roll-top closure with snap/hook-and-loop, high-quality "moto centric" speed buckles and an Anti-Flail Snap System. The adjustable yoke center section holds the two bags together and can be widened or narrowed to fit over your fender. Allows for quick removal in less than five minutes. Universal support...

Constructed from wet-waxed UV-treated cotton canvas with leather securing straps and carry handle. Features an eight-pocket system in three widths, a catchall zippered pocket, speed buckles, and an anti-flap snap closure system. The adjustable quick-release mounting system works on handlebars, sissy bars, or side frames.

Embody the aggressive cruiser style with sweeping lines. Two styling pockets flank the headlight bucket. Made of high-quality, molded ABS and paired with an opaque impact-resistant acrylic windscreen. Includes universal mounting kit.

A mounting kit designed to easily attach and detach removable saddlebags. Made from 1015 steel rods, the kit includes left and right mounts and all necessary bolt-on hardware. A mounting kit designed to easily attach and detach removable saddlebags. Made from 1015 steel rods, the kit includes left and right mounts and all necessary bolt-on...

Available in two styles: stainless steel braid with chrome fittings and black vinyl with black chrome fittings. Build the perfect length every time. Easy installation – route, cut, and assemble in less than 10 minutes. Clutch cables are high-efficiency design.

Made of Ultra High Molecular Weight (UHMW) poly for unmatched durability. Direct replacements for all previous design C&A handles. Black handles are included with skis; different colored handles available to suit any rider's taste. Race legal, hardware included, and sold in pairs.

Complete mounting kits for C&A Pro skis. Includes: 2 bolts, 2 nuts, 2 rubber dampers, 4 bushings, 4 washers. Sold in pairs.

High-performance aftermarket snowmobile skis designed for various riding conditions, from deep snow to aggressive trail handling. Used in professional snocross and watercross championships. Features preloaded tips to absorb impacts. Sold in pairs. Mounting kits and wearbars/runners are required and sold separately.

50 cm cable for the SP Connect™ Charging Module and Charging Anti-Vibration Module. Features a weatherproof jack. Cable USB-A