Don’t have an account? Register
Canadian-owned. No duty surprises. Need help? 1-800-291-9509
Available in white DRL with amber turn signals. Compatible with Decorative Vent Inserts PART #s 2350-0356 or 2350-0357 (sold separately). Installs with included chrome tie wraps. Plug-and-play. Sold in pairs.
Adds stylish visibility to the back of Street Glide, Road Glide and Road King Special. Features 45 super-bright dual-intensity red LEDs functioning as run/brake or run/brake/turn. Sealed behind red or smoked lens with chrome or gloss black trim.
Sit right below the fender and blend seamlessly into the back of the bike. Run, turn and brake lights. Plug-and-play installation with no drilling required. Low-profile, automotive-grade polycarbonate red lenses. HI-LO turn signals. Super-bright Everlight brand LEDs. Will work with Harley-Davidson mud flaps when properly installed. Sold in pairs.
Upgrades the fender reflector to a dual-intensity LED light. 75 red LEDs behind a smoke or red lens help increase side visibility. Plug-and-play with extended wire harness.
Covers exposed rear fender support bolts. Compatible with Custom Dynamics ProBeam Fillerz Saddlebag LED lights. Installs with double-sided tape.
Low-profile turn signals mount flush to the OEM mirror stems to sit flush with the OEM controls. Die-cast aluminum housings; measure 1 3/8" L x 9/16" W x 9/16" D. Features five dual-color LEDs with white running light and full-contrast amber turn signal light. Textured satin black finish with smoke lenses. 26 AWG wire leads measure 48" L. Equipped...
Upgrades fork reflector light to dual-intensity LED light. Amber LEDs with dual-intensity running light and turn signal illumination. Plug-and-play.
Billet aluminum construction. Brackets attach to front brake caliper mounts. Fully adjustable design with 10 mm x 1.5 mm lamp mount stud. Compatible with ProBEAM® fog lights.
Plug-and-play solution for extending the OEM front turn signal wires. Easily allows for relocation of OEM turn signal housings when handlebars are upgraded. Plug-and-play JAE connectors are offered with four different lengths and color matched wire colors. Harnesses easily plug in-line with left and right OEM turn signal connections extending the...
Red LEDs provide a bright red turn signal flash. Each Genesis 4 rear turn signal has a black circuit board with 48 red LEDs and 1156 pigtail bulb base. Plug and play replacement for OEM rear turn signal bulbs on H-D motorcycles with bullet, flat or old bullet (2 screw) turn signal housing. Must be installed with ProBEAM bullet turn signal lenses....
Rear 1156 LED turn signal inserts made with 48 LEDs per unit. Must be installed with ProBEAM bullet or flat turn signal lenses (sold separately). Outer ring of 24 red LEDs functions as a running and brake light. 24 center amber LEDs function as turn signals. 1156 bulb base will plug into turn signal socket with two extended wires to access running...
48 red LEDs per unit. 24 red halo LEDs for run light. 24 red center LEDs for brake and turn signal. Plug-and-play. Must be installed with ProBEAM bullet-style turn signal lenses (sold separately). Sold in pairs. DOT/SAE compliant.
Dual intensity amber LEDs provide a bright solid amber running light and full contrast amber turn signal. Black circuit board with 48 dual intensity amber LEDs and 1157 pigtail bulb base. Plug-and-play replacement for OEM front turn signal bulbs on US and Canada model Harley-Davidson motorcycles with bullet turn signal housing. Must be installed...
48 super-bright dual-color LEDs. Bright white running lights and full amber turn signals. When turn signal is activated, the white DRL turns off completely for greater visibility to the turn signal. Plug-and-play. Must be installed with ProBEAM bullet or flat turn signal lenses (sold separately). DOT/SAE compliant. Sold in pairs.
Wires of pre-cut lengths are prepped to easily extend OEM wires when installing extended handlebars. Color-matched wires include OEM-style pins or connectors on each end.
Aluminum light bar with six high-power LEDs. Produces a super-bright beam pattern to be used in addition to a headlamp. Mounting bracket included for securing to the triple tree using the factory headlamp mounting bolt. Offered with clear lens for bright white light or selective yellow lens for improved visibility in harsh weather conditions.
Plug-and-play module that makes front turn signals strobe alternating left to right while the horn is activated. Select from 10 built-in flash and strobe patterns. Requires front OEM turn signals to be converted to low current LEDs.
Aluminum frame trims out the license plate in black or chrome finish with six bright-white LEDs flush mounted across the top. Plug-and-play.
Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct 12VDC hook up with no resistor required. Includes 48" of 22-gauge wire covered in black sheathing. Sold each. Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct...
Made from billet aluminum. Mounts under rear fender; replaces stock reflector and mount. Dual intensity red LEDs function as run, brake, and turn light.
Mounted with double-sided automotive grade tape. Adds 30 super bright LEDs as running/brake light. Turn signals split the taillight bar with 15 red LEDs per side.
Includes run, brake, turn functions. 40 dual-intensity run/brake LEDs and 20 red turn signal LEDs per side. Plug-and-play installation.
Total isolation of all lighting and electrical accessories from vehicle. Short circuit protection of all outputs without any relays or other mechanical devices. Plug-and-play. 30-amp max total capacity. Isolated integrated output: turn/brake output.
Brake light containing 21 high-power dual-intensity red LEDs designed for maximum visibility. Brake will flash for approximately 6 seconds and then go solid until released. No load equalizer or resistors required. Dimensions: 7 1/2" L x 7/10" W x 7/10" H. Sold each.
Light bars featuring 12 super-bright LEDs with 3M™ double-sided tape for easy mounting. No load equalizer or resistors required.
No ride selected
No recently viewed products
Select the year of manufacture
Choose the manufacturer
Select your specific model
Your cart is empty
info@dreamcyclescanada.com
315-666-6688