All Products

Utilize super-bright LEDs for an eye-catching red, amber or white/amber LED light. Measure 5/8" in diameter and mount in a 1/2" hole. 4' of wire for installation. Red LED Boltz are dual-intensity, 3-wire. Amber LED Boltz are single-intensity, 2-wire. White/amber are 3-wire with white running light and amber turn signal; requires converter PART...

Replace OEM #194 bulb. 40 wide-angle super-bright LEDs. Available in amber or white front LED lights, or run/brake rear LED lights. Can be used behind any color lens. Sold each.

Direct replacement for stock. Available with chrome or gloss black finish. Note: Wiring Adapter PART #2120-0887 (sold separately) required on 14-22 FLHR, 17-19 FLHTCU and 20-24 FLHTCUTG to extend wires when replacing stock chrome decorative piece.

Required when replacing the stock dual-halogen headlamps with an LED headlamp or any other H4 based headlamp. Sold each.

Features 20 super-bright flush-mount dual-intensity red LEDs per side with six bright-white tag light LEDs. Comes in black finish and can be wired as run/brake/turn lights on motorcycles with rear 1157 turn signals. Mounting hardware included. Frame dimensions are 4 1/4" H x 7 1/4" W. Features 20 super-bright flush-mount dual-intensity red LEDs...

Low-profile, sleek design license plate frames illuminated with six bright-white LEDs. Available in flat and radius styles with a black, gold, or chrome finish. Mounting hardware is included. Frames measure 4 1/4" H x 7 3/16" W, with mounting holes at 5 3/4" x 2 13/16" center-to-center.

Feature six high-power LEDs in a die-cast aluminum housing. Mounting bracket is stainless steel. Built-in on/off switch. Include a wiring harness for direct plug-in installation. 12VDC, 18W, 800 lumens. Measures approximately 6 1/4" L x 1 3/4" W x 2" H.

LED inserts that function as both running and auxiliary turn signal lights. They snap in place with plug-and-play installation and feature 53 amber LEDs per side. The inserts produce a bright amber running light with full-contrast amber turn signal that is virtually invisible when off.

Compact turn signal assembly with super bright LEDs. When the turn signal is activated the white light turns off to provide greater visibility to the amber turn signal. Direct bolt-on replacement with M10 1.5 x 14 mm mounting stem.

Low profile aluminum radius (12° curvature) horizontal license plate frame. Six white LEDs built in for license plate illumination. 50 dual-intensity red LEDs flush-mounted across the bottom illuminate as running/brake lights. 20 amber LEDs on each side function as turn signals. Available in chrome or black finish. Mounting hardware included....

Offer super bright chip-on-board white LEDs for license plate illumination. Simple two-wire installation with 18" wire leads. M-6 x 1" thread. Fit all models with 12VDC negative ground systems. Thread diameter is 0.232", length is 0.59". Head diameter is 0.469", height is 0.711". Sold in pairs.

Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for flush-mount or surface-mount applications. Aircraft-grade 6061-T6 billet aluminum housing with a chrome finish. Features 120 Custom Dynamics Genesis II LEDs. Includes installation hardware for...

Direct bolt-on aluminum mount installs using two mounting bolts used for the factory rear turn signal to anchor the license plate frame below the taillight. No drilling required.

Relocates license plate to below the OEM taillight. Direct bolt-on aluminum mount installs behind the factory center taillight. Anchors the license plate frame below the taillight with no drilling required. Does not fit models that have fender-mounted turn signal bars.

Acts as a no-load, no-heat load equalizer. Converts rear 1156 turn signals to function as run/brake/turn signals. Features 10 user-selectable built-in brake light, or strobe/flash patterns. Plug-and-play.

45 dual intensity red run and brake LEDs. Low profile design protrudes only 2 inches. Built-in left and right amber auxiliary turn signals. DOT/SAE compliant.

Sleek 7/16" low-profile design saddlebag lights. Functions as low intensity run light with high intensity brake light (standard) or with sequential turn signals (sequential models). Mounts to the top edge on OEM H-D saddlebags.

Slim design light bar with 50 dual-intensity red LEDs. Comes pre-taped for mounting to any flat surface. Features a simple 3-wire hookup. Measures 7" L x 0.5" W x 0.4" H.

65 dual-intensity red LEDs per unit behind a red or smoke lens. Mount to the bottom of the rear fenders with tape. Extended wire for plug-and-play installation behind the OEM rear taillights. Run, brake and turn signal function. Sold in pairs.

Low profile design protrudes only 2 inches from stock baseplate. Features 45 red LEDs with dual intensity running and brake lights. Plug-and-play, DOT/SAE compliant.

Add easy-access power terminals for accessories. Handles up to 15A of power with built-in fuse-protected circuit. Sold in pairs.

A compact, bright spot of light with six high-power single-function LEDs. Ideal for adding an extra brake light (red), extra turn signal (amber), or for license plate illumination (white). Simple two-wire connection. Measures 2.3" L x 0.45" W x 0.2" H. Sold each.

A color-changing LED accent light system. Kits include a wiring diagram, installation kit, and a Bluetooth-compatible Color Command remote control. The remote allows the user to select from seven pre-programmed colors, create a custom color, or rotate through all colors at various speeds and patterns. All accent lights are pre-taped with 3M tape...

A comprehensive collection of color-changing LED accent light kits for motorcycles, featuring solid color modes, music synchronization, and brake alert functions. Kits are available with different controllers and component configurations. Not for V-Rod models.

Controls Magical Wizards™ LED accent light system. Connects to the ProGLOW™ app through a personal iOS or Android device to customize and control color changing lights. Includes a push button main power switch, three independently controlled zones (front/mid/rear), and can sync with audio. Features solid color, color-changing modes, and color...