All Products

Smooth housing including a 60/55W bulb and low-intensity running light. Mounting block included. ECE compliant (not DOT compliant).

12V headlight features an H4 55/60W bulb and an additional 5W low-intensity running light mounted in the housing. DOT compliant.

Chrome air cleaner fits Harley models equipped with Bendix, Keihin carburetors or Delphi EFI. Air filter included.

All socket-head bolts are chrome-plated with smooth polished heads. Sold in 5-packs.

Tumbled, chrome-plated washers can be installed under luggage rack legs, saddlebag lid rails or anywhere else you need extra support. Use to dress up scratched or cracked areas due to drilling. Sold in 4-pack. Made in the U.S.A.

Mounting bracket is 4 3/4" shorter than stock brackets. Give the rear of the bike a sleeker look; use stock mounting hardware. Available in chrome.

Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance. Rated at SAE Class E J2031 with a continuous operating temperature of 450 °F. Made in the U.S.A.

Deliver up to five times more energy to the spark plug. Fully compatible with fuel-injection systems. Will work great with carbureted engines as well. Can withstand temperatures over 500 °F. Silicone outer layer.

Adjustable highway peg mount kit featuring black-finished mounting brackets and chrome footpeg arms. Arms are adjustable to three pre-set positions. Accepts most male mount pegs (not included).

Includes all items shown; breaker plate assembly and the advance unit with bolt can be purchased separately.

Replacement gas cap for Drag Specialties gas tanks that accept Aero caps. Includes keys, gasket and bolts.

Specifically designed for hard-starting, high-performance engines that need extra cranking power. Radial grid technology delivers higher cranking amps and superior performance. Special absorbed glass mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid Pack included. Superior...

Chrome air cleaner braces provide additional support for Dragtron II air cleaners or any flat-backed air cleaners. Mount to the cylinder heads. Can be used in conjunction with most breather kits. All gaskets and mounting hardware included.

Enables the mounting of most aftermarket air cleaners to late-style engines that breathe through the cylinder heads. Fittings can be rotated 360 degrees so hoses can be routed as necessary. Hose sold separately.

Each meets or exceeds OEM specifications and features precise construction.

Covers the stock antenna stud when the stock antenna is relocated. Made in the U.S.A.

Machined from solid aluminum, then chrome-plated to a smooth finish. Snap-on locking feature keeps covers in place. Sold in 4-pack. Made in the U.S.A.

Die-cast outer primary covers. Hardware, gaskets, and bushing not included.

High-quality OEM replacement components. Replaces worn or broken clips on most clutch levers. Includes mounting screw. Sold in 10-pack.

Directly replaces the stock rear tail light. Features multiple LED lights that illuminate with a variety of programmable brake and start up animations. Powered by free Lightstrike application. Available in high-strength polycarbonate red or light smoke lens and includes both chrome and black accents. DOT/ECE approved.

Die-cast aluminum construction. Held in place by setscrews. Sold in pairs.

Bright chrome finish on axle and hardware beautifies your bike. Machined from chromoly steel (unless noted). Kits include axle, spacers, nuts and washers. Models with ABS will require only one of the spacers in kits.

Fits 9/16" x 2" thick Drag Specialties sissy bars and most Harley-Davidson sissy bars with a 4" wide ID. Smooth and pillow-style pads feature automotive-grade vinyl on sides and in contact area; leather pads have solar reflective material in the contact area. Each pad comes with two black powdercoated 12-gauge brackets and four 1/4" x 20 screws....

Mounts easily to underside of hitch ball for a quick, clean way to connect/disconnect trailer light wiring. Includes a chromed receptacle plate, chrome safety chain hookup, a five-pin male/female plug-in connector and all wiring and hardware. Also fits other brands of trailer hitches.

Washers feature a rubber seal that provides superior sealing around the banjo bolt. Sold in 10-pack.