All Products

A replacement rod end linkage with zinc-plated steel construction. It is designed for the KFI manual lift PART #4501-1106. Made in the U.S.A.

The Sno-Devil plow system and related replacement components for ATVs. The complete system includes a universal hybrid mount, 48" blade, and push tubes. Requires a winch for lifting.

Two-way adjustable snow plow flap kits to increase blade height and control snow flow. Kits include an 11ga steel edge strip, a 6.5" rubber flap, and all mounting hardware. Replacement hardware is also available.

12" L x 1.20" W. Can be used as a tie down loop. Designed to be used with plow pulleys as an attachment point for your hook.

Standard replacement ear for the PRO 2.0 Square Tube. Made from Grade 50 steel and powdercoated black. Sold as a set of two (both sides included). Mounting hardware included. Made in the U.S.A.

Increase your blade end visibility for added safety with these plow marker kits. They bolt to the side/ends of your blade and include two markers per kit. Available in Pro-Series or Pro-Poly styles. Poly markers feature a steel 89° angled base.

Constructed of 3/16" steel. Powdercoated black for supreme durability. Includes upper hook attach hole and complete installation instructions. No mounting hardware required. Made in the U.S.A. NOTE: Receiver will fit any standard four-hole winch mount without fairlead flange (3" x 4.875" bolt-up pattern).

Heavy-duty 5,000 lb. winches designed for UTVs. Available in standard or wide spool configurations. Features a 12VDC, 1.22 hp permanent magnet motor, 180:1 gear ratio, and includes a dash rocker switch, 14' corded hand-held remote, and a cable hook stopper.

This kit works with UTV push tube PART #4501-1004 (sold separately). The locking pin comes assembled in the kit. You must reuse the original hardware. Drilling is required for installation. Made in the U.S.A.

This lever lift repositions the lift attach point to help reduce winch and cable strain from lower mounted winches and bad cable angles. It is fully adjustable for multiple angles and attach points. Designed to work with KFI UTV push tubes only and will not work with a plow actuator. Constructed of heavy-duty 3/16" grade 50 steel, shot-blasted,...

Replacement brackets specifically designed for use with KFI UTV tubes and open trail tubes on vehicles with a UTV track extension. These powdercoated tough brackets are made in the U.S.A. and require drilling for installation. Does not include the tube system or actuator (sold separately).

Grade 50 steel replacement tube weldment for the new PRO 2.0 Square UTV push tube. Shot blasted and powdercoated black for durability. Made in the U.S.A.

Heavy-duty UTV winches featuring water-resistant seals, all-metal turn clutch, and a 4,500 lb. rated line pull. Includes a hand-held remote and a dash rocker switch. Available in standard and wide mounting configurations.

Extends UTV blade 12.25" forward. Constructed of heavy duty 1/4" Grade 50 steel. Shot-blasted before being powdercoated black for best possible finish prep and supreme durability. All hardware included.

A collection of universal and replacement electrical components for ATV/UTV winches, including wiring kits, switches, remotes, and contactors.

A selection of roller and hawse fairleads from KFI for use with synthetic and steel winch cables on ATVs and UTVs. Available in standard and wide bolt patterns to suit various winch setups.

Constructed of 10-gauge grade 50 steel. Metal-bead blasted then powdercoated black for supreme durability and the best possible finish prep. Made in the U.S.A.

A comprehensive range of KFI winch mounts specifically designed for Polaris ATV models. These mounts are required to install various KFI winches. Please use the fitment chart to select the correct mount part number for your vehicle and winch combination. Note: Some applications may require an additional bumper adaptor (PART #4505-1050) or the use...

Winch mounts designed to complement a wide range of winches. Accommodates standard 2-hole and 4-hole ATV winch bolt patterns. Steel construction, metal-bead blasted before being powdercoated for a durable finish. Easy to install with included instructions and provides easy access to the winch cable. Roller fairlead and winch not included. Made in...

A selection of durable recovery gear and accessories for ATV/UTV winching, including snatch blocks, shackles, straps, winch covers, and cable hook stoppers.

A comprehensive range of replacement parts and accessories for KFI winches, including remote controls, motor components, steel and synthetic cables, rope sheaths, and hooks.

Constructed of 3/8" steel and powdercoated black for supreme durability. Required with some winch applications for winch and frame clearance. Fits standard and wide bolt pattern. Made in the U.S.A.

Mid-bend design for performance applications. Super strong and lightweight. Notched for electronic throttle control with large drill-outs for internal wiring. Knurled on 3 1/2" centers with a 1" diameter center clamp area. Can be used with high or low riser clamps. Gloss black finish. Dimensions: End Rise 3 3/4", Width 30 1/2", Center Width 4...

Fat 3.5" diameter produces deep tone and impressive aesthetics. Eliminates unnecessary factory heat shield for a clean look. 2.00" mechanical baffle means sound doesn't change over time. Includes Khrome Werks' laser-cut 'Shredder' aluminum end caps.

Dampen sound without impeding flow-through performance. All-steel construction; baffles feature patented HP-PLUS design. Install easily on 1 3/4" or 2" 16- or 18-gauge drag pipes. Baffles held by 1/4"-20 screws and locking nuts. Made in the U.S.A.