All Products

Get the look and feel of Kuryakyn ISO®-Grips without losing the heat. Clamshell design clamps on over the OEM heated grips so the heat can come right through. Install with self-adhesive strips. Can use extended ISO-Throttle Boss PART #0630-1143 and ISO-Grip accessories. Sold in pairs.

Kuryakyn pegs with adapters that let you install them directly to the OEM footpeg brackets for a classy upgrade in just minutes. Sold in pairs.

Attaches to the end of Kuryakyn's ISO®-Grips. Small adjustable paddle is positioned under the palm of the hand. Allows the rider to maintain a steady throttle position with a relaxed grip. Redesigned rubber pad permits use on both grips. For use with Kuryakyn ISO-Grips only. Extended Throttle Boss is approximately 1/4" longer than standard.

Emits ultra-bright pure white LED illumination. Bracket support plate measures 2 3/4" wide x 2 1/4" tall (light source extends 1 1/4" from backer plate). Attaches to virtually any license plate bracket via high-strength 3M VHB or fastened with screws (not included). Compatible with all 12V electrical systems. ECE approved, not certified for...

Extremely small, spectacularly bright LED technology with Long Life Protection Guard® delivers maximum LED lifespan and spectacular brightness. High-quality metal housing available in chrome or satin black finish with durable glass lens in clear or smoke (dark) styling. Universal for most 12VDC applications with M5 x 0.5 x 6.5 mm mounting thread....

High-power LED technology with Longlife Protection Guard®. Amber signal for handlebar-end applications only, 2-wire. Signal is visible from front and rear of motorcycle. Includes adapters for secure mounting on most standard handlebars (7/8" and 1"). High-quality metal housing with durable glass lens. Universal for most 12VDC applications. Sold...

Features Kellermann high-power LED technology, Longlife Protection Guard® and HPT® Homogeneous Projection Technology. Red/red/amber for rear applications only: red halo running light, with red brake and amber turn signal center (4-wire). High-quality metal housing with durable glass lens. Universal for most 12VDC applications with M8 x 20 mm -...

Ultra-bright red run and brake illumination. Equipped with a built-in bracket for easy mounting on almost any rear fender. Rear applications (3-wire). Universal for most 12-volt applications. Features Kellermann high-power LED technology with Longlife Protection Guard® and HPT®. High-quality metal housing with durable glass lens. Sold...

LED technology with Long Life Protection Guard® for maximum LED lifespan and brightness. High-quality metal housing with durable glass lens in clear or smoke (Dark) styling. Flexible rubber base helps prevent prolonged vibration damage. Universal for most 12VDC applications with M8 x 20 mm - 1.25 mounting thread. Sold individually. ECE compliant.

Improves access to the kickstand; can be used on almost any motorcycle. Fully adjustable. If used with Kuryakyn's Driver Floorboard Kits, you can access the kickstand without having to fold up the floorboard. Sold each. Improves access to the kickstand; can be used on almost any motorcycle. Fully adjustable. If used with Kuryakyn's Driver...

Combines the comfort of the original ISO-Pegs with a modern, aggressive style. Measures 5-1/8" x 1-1/8". Feature male-mount ends. Sold in pairs. Combines the comfort of the original ISO-Pegs with a modern, aggressive style. Measures 5-1/8" x 1-1/8". Feature male-mount ends. Sold in pairs.

Designed to keep moving forward with the latest in styling and vibration-isolating technology. Aluminum body and EPDM rubber to help ride with less fatigue and more control in a modern design. Available in chrome or gloss black finishes.

Ideal for driver or passenger, these mini boards combine the size and convenience of a peg with the comfort of a full-sized floorboard. They can be positioned forward, back or center at almost any angle utilizing splined adapters and are designed to coordinate with other Kinetic™ products. For male-mount front peg applications. Ideal for driver...

Cover those unsightly and unfinished bolt heads for a smooth, finished appearance. Install easily over the heads of existing bolts. Sold in 10-pack.

Streamlines the look of your license plate. Mounts using the H-D standard 3-bolt pattern. The kit includes a rubber wedge so you can choose the angle of the license plate. It accepts most 4" x 7" license plates and all hardware is stainless steel. Streamlines the look of your license plate. Mounts using the H-D standard 3-bolt pattern. The kit...

Allows you to monitor your motorcycle charging system with just a glance. Green LED indicates normal operating range of 12.5 to 14.5V. Amber LED warns the bike is not charging. If reading drops below 10V or exceeds 15V, flashing red LED alerts the rider. Simple two-wire connection. Gauge measures approximately 2" x 3/4" x 3/16"; daylight sensor...

Enhance the look of your Batwing fairing and be more visible. Plug-and-play wiring for a quick, simple installation. Available with white LEDs and a chrome or satin black finish.

Replaces amber reflectors on the lower fork leg covers with LED dazzlers that function as running lights and turn signals. Sold in pairs for great looks and added visibility. Replaces amber reflectors on the lower fork leg covers with LED dazzlers that function as running lights and turn signals. Sold in pairs for great looks and added visibility.

LED illuminators available with or without LED turn signal accents. Both styles have two white LEDs that illuminate the license plate and mount using a hollow 1/4" stud with internal wiring for a simple, clean installation. License plate frame not included. Sold in pairs.

Use as marker lights or auxiliary turn signals. Power leads exit the hollow 3/8"-16 x 5/8" mounting bolt for a clean look. Clear lens with amber LEDs. Dimensions: 2 3/4" L x 1" D. Do not include load equalizer. Sold in pairs. Use as marker lights or auxiliary turn signals. Power leads exit the hollow 3/8"-16 x 5/8" mounting bolt for a clean look....

A durable injection-molded ABS hitch cover with high-output red, white, and blue LED graphics. It fits 1 1/4" and 2" receiver hitches and plugs directly into a standard 4-pin flat connector. A durable injection-molded ABS hitch cover with high-output red, white, and blue LED graphics. It fits 1 1/4" and 2" receiver hitches and plugs directly into...

Stylish and functional accent swoops that conform to the lines of stock saddlebags, bridging the gap between textured black and painted bodywork. Feature super bright LEDs operating as running lights and turn signals. Stylish and functional accent swoops that conform to the lines of stock saddlebags, bridging the gap between textured black and...

An easy and affordable option to upgrade stock turn signals or taillights from incandescent to LED. This 1157-styled bulb is a direct replacement for the stock incandescent bulb and is great for use with clear or smoke lenses. Load equalizers may be required depending on the application (sold separately). Not FMVSS-108 certified. Sold...

A chrome-plated backing plate and trim plate that installs on most stock license plate brackets to enhance the look of your plate. Accepts most 4" x 7" license plates. A chrome-plated backing plate and trim plate that installs on most stock license plate brackets to enhance the look of your plate. Accepts most 4" x 7" license plates.

A versatile license plate mounting plate that bolts to the back of almost any motorcycle and includes a convenient helmet lock. Features a 7" W x 4 1/4" H backing plate with a 5 1/2" x 2 7/8" mounting pattern. Sold each. A versatile license plate mounting plate that bolts to the back of almost any motorcycle and includes a convenient helmet lock....