All Products

Pulls handlebars back 2 1/4" closer to the rider with only 1" of total rise. Improves comfort and handling. Designed to match and complement the bike's original styling. Beautifully sculpted billet aluminum with no visible hardware for a super-clean look. Works with stock cables and lines. Made in the U.S.A.

Hand-machined, carefully polished and bathed in lustrous chrome. Faceted edges catch and refract light, adding a dynamic design element to your engine. Cover the area between cylinders, hiding the unsightly throttle bodies and their lines. Innovative mounting brackets are easy to install. To be used on bikes that have had the faux plastic air...

Gets rid of the large, unattractive sub-fender and huge license assembly. The integrated one-piece hidden mounting platform places your license on a sweeping angle, exposing more of your fat rear tire for an aggressive look. It includes a sculpted chrome license frame with integrated dynamic LED lighting. Recessed turn signal mounts allow use of...

Passenger floorboards and mounting brackets to improve passenger comfort and legroom.

Improves performance by fine-tuning your carburetor. Includes Baron's adjustable needle, Mikuni main jets, replacement float bowl screws and the allen wrench to remove the stock needle. Specially engineered to work with high-flow air cleaners. Some kits may be supplied with Baron's BMX. Made in the U.S.A.

Engineered to allow your shock to work effectively. This spring is a necessity for heavier riders or when carrying passengers. Improves damping control while eliminating bounce. Provides better control in corners and rough roads. Great with or without lowering kits. Sold each. Made in the U.S.A.

34-tooth front drive pulley raises the final drive ratio and allows the bike to cruise at a lower RPM. Optimizes gas mileage and performance at highway speeds. Installs easily utilizing stock belt. Solid steel construction provides years of use. 34-tooth front drive pulley raises the final drive ratio and allows the bike to cruise at a lower RPM....

Gives the gas tank a custom look. A special insert allows the use of a Baron polished stainless-steel, threaded cap instead of the stock locking cap. Quick and easy to install with two-part epoxy (included). Made in the U.S.A. Gives the gas tank a custom look. A special insert allows the use of a Baron polished stainless-steel, threaded cap...

Repels water, dirt and dust. K&N BAK filters are water-resistant, but extended riding in the rain is not recommended. Does not fit the Stealth Big Air kit that uses a K&N RE-5333 filter (does not fit K&N billet filter kits). Made in the U.S.A.

Stock horns are pretty ugly looking, so Baron designed this beautifully chromed accessory to cover them. Made in the U.S.A. Stock horns are pretty ugly looking, so Baron designed this beautifully chromed accessory to cover them. Made in the U.S.A.

Engineered to lower the rear of the motorcycle a safe and perfect 1". Makes it easier to hold up bike while stopped. Lowers the center of gravity for improved handling. Properly relocates the stock caliper to a new position to eliminate interference with fender. Lowering arms, caliper relocation bracket included. Made in the U.S.A. NOTE: Lowering...

Quickly and easily give your bike that low-down custom look. Includes brackets and all necessary hardware for a complete installation. Made in the U.S.A.

Dyno-tested for substantial increases in horsepower and torque by 8% to 10%. Patented design alters the velocity stack, which allows unrestricted airflow to the engine. The system clearly integrates under the fuel tank, replacing the ugly and restrictive stock airboxes. Gets rid of the restrictive stock airbox and filter, and replaces them with a...

Allows most Harley-Davidson®-style risers with 1/2" x 13 threads to be converted to mount on Honda, Kawasaki, Suzuki and Yamaha cruisers. Includes two studs, two aircraft nuts, two washers, two jam nuts and installation instructions. Easy to install.

Direct replacement for the stock plastic guard on Yamaha Road Star models. This beautifully styled and chromed guard is made of sturdy steel that does not dent easily like aluminum covers. It features a belt adjustment window and includes all necessary instructions and hardware. Installation does not require removal of the rear wheel. Direct...

Lowers final drive ratio and shortens the time between stop signs. Direct replacement for stock pulley that reuses the stock drive belt. Sends the bike streaking to its top end and reduces the need to downshift. Lowers final drive ratio and shortens the time between stop signs. Direct replacement for stock pulley that reuses the stock drive belt....

Ape Hanger handlebars add aggressive style. Features a gloss black powdercoated finish and accept stock controls. Both styles measure 29" wide with 6" of pullback. Will require a cable kit (sold separately, see page 448). Made in the U.S.A.

Includes a heavy-duty spring and lowering kit for the Yamaha XV1900C Raider 08-17. Made in the U.S.A. Includes a heavy-duty spring and lowering kit for the Yamaha XV1900C Raider 08-17. Made in the U.S.A.

Dyno-tested for substantial increases in horsepower and torque by 8% to 10%. Patented design alters the velocity stack, which allows unrestricted airflow to the engine. The system clearly integrates under the fuel tank, replacing the ugly and restrictive stock airboxes. Gets rid of the restrictive stock airbox and filter, and replaces them with a...

Provides correct rpm display and reduces needle fluctuation. Fits most accessory electronic tachometers. Required for most 2- or 4-cylinder engines with single-fire ignition and for most bikes equipped with fuel injection. Has been redesigned for owners who have had tach bounce issues in the past. Provides correct rpm display and reduces needle...

Handlebars for motorcycles with a 1" clamping area and 3 1/2" on-center risers. Mitered tips for an enhanced, customized look. 1 1/4" double-walled bar for added strength and unique styling. Direct bolt-on design does not require aftermarket cables or wiring. Compatible with all 1" grips and stock levers. Made in the U.S.A. Dimensions: End Rise...

Eliminates the need to remove the exhaust system for oil changes on Yamaha V-Star models. The kit comes pre-assembled for easy installation and includes #8 lines that equal or exceed factory specifications, braided stainless steel lines with chromed, threaded compression-sealed valves, and a high-quality chrome oil filter with a magnetized center....

Pull handlebar back 1 1/2" closer to the rider to relieve back, neck, shoulder and arm pain. Improved grip point provides additional leverage and makes bike easier to control. Works with stock controls, lines and cables. Allows use of Baron Starbar handlebar on Venture models (sold separately). Easy to install with supplied instructions. Made in...

Unleash the 'War' in your Warrior with the Stealth Big Air kit. Dyno-tested horsepower and torque increase. Quickens acceleration and reaches speed much more rapidly. Aggressive look, sound and assertive. Includes unique relocation mount for ignition coils and FI sensors allowing clearance for the K&N hi-flow filters. Comes complete with K&N...

Unleash the 'War' in your Warrior with the Stealth Big Air kit. Dyno-tested horsepower and torque increase. Quickens acceleration and reaches speed much more rapidly. Aggressive look, sound and assertive. Includes unique relocation mount for ignition coils and FI sensors allowing clearance for the K&N hi-flow filters. Comes complete with K&N...