All Products

Precisely controls over-revving and launch rpm. Designed for the odd firing angle of Harley-Davidson V-Twins. Spares unnecessary poundings of expensive engine components.

Plugs directly into the Power Commander V with a single cable. Includes 18 mm O2 sensors and power connector that plugs into the bike’s harness. Makes automatic fuel adjustments. User can specify what air/fuel ratio to make each rpm and throttle position percentage combination. Makes it possible to adjust cruise for best fuel economy as well as...

Includes Wideband O2 or Dual Wideband O2 sensors and control box. Plugs directly into the Power Commander. The kit automatically adjusts the fuel map while riding. Includes O2 sensor bungs.

Plugs directly into the Power Vision with a single cable. Includes 18 mm O2 sensors and power connector that plugs into the bike’s harness. Provides real-time AFR feedback to the Power Vision. Allows for semi-automated fuel corrections. User can specify what air/fuel ratio to make each rpm and throttle position percentage combination. Makes it...

Constructed of high-quality acetal plastic material to keep the axle protected in case of a fall. Designed to hold tight sealing inside your axle. Easy, no-tool assembly. Sold as a set.

Adds height to the brake pedal for a more comfortable standing position. Made from 6061-T6 aluminum. Hard anodized in stealth gray finish. Made in the U.S.A.

Replaces the stock chain adjusters. Made of 6061-T6 aluminum. Captures the nut on the left-hand side. Hard anodized in stealth gray finish.

Billet aluminum guard deflects rocks and shields the drive system from impacts which would derail the chain. Constructed of 6061-T6 aluminum and reinforced between the tabs with a hard anodized stealth gray finish. Made in the U.S.A.

Individual main jets for carburetor tuning, sold by size.

Eliminates the need for a heavy, bulky exhaust servo motor and valve assembly when using an aftermarket exhaust. Keeps the FI light from coming on unless there is a 'real' problem with the bike's systems. Eliminates the weight of the fake 'valve', adds space for additional components.

Protects the ignition coil in the event of a tip over. Made from 6061-T6 aluminum with hard anodized stealth gray finish.

Allows any vehicle with up to four coils to have quick shifter functionality. Features the latest Intellishift technology and provides the smoothest shifts of any stand-alone unit on the market. Kill times per rpm band and shift sensor activation point are adjustable. Includes Denso coil cap connectors for easy installation on many late-model...

Individual components and accessories for Dynojet and Keihin carburetors.

Dynojet Jet Kits for various motorcycles, available in multiple stages for different levels of modification and performance increases.

Allows for ignition timing curve based on throttle position and RPM, and to tune each cylinder individually. Ignition Module connects to PCV USB via a built-in expansion port link. Connects to the ignition coils through an intermediate harness connection. Direct coil driver technology allows for a high degree of flexibility in timing adjustments.

Real-time fuel adjustment. Displays channel data such as rpm, TP, map position (when using map switch), duty cycle, fuel exchange, ignition change and wideband air/fuel ratio (w/ WB2 or auto-tune connected). Weather resistant for use in all conditions. Log channels saved to internal memory and can be viewed/analyzed with Dynojet's Power Core...

Compact design for discrete placement and easy uninstallation to revert to stock settings. Easily change and upgrade tunes as you upgrade exhaust and air cleaners. Comes with Power Core software that connects dyno runs with EFI Tuning Devices to unlock your ride’s potential. Pair with other Power Commander accessories like the Autotune,...

A fuel injection tuning device with a compact design for discrete placement, allowing for easy upgrades and un-installs to revert to stock settings. Pair with other Dynojet accessories like the Autotune, Quickshifter or POD-300 for enhanced tuning. The analog input allows you to install any 0 to 5v sensor and build an adjustment table based on its...

Compact design for discrete placement and easy uninstallation to revert to stock settings. Easily change and upgrade tunes as you upgrade parts. Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride's potential. Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300....

The Power Commander 6 PTI is the same great tool as the Power Commander 6, but is perfect for turbocharged or supercharged applications looking for precision, control and reliability. It features a pressure input table for 3D mapping capability based on boost vs. rpm, a software table providing 2D mapping capability with up to 50 points of...

Accessories for use with Dynojet Power Commander fuel management units, including map switches, autotune kits, and digital displays.

Plug-n-play fuel management device pre-programmed with make/model specific maps. Uses OEM-style connectors and high-quality wiring harnesses. Small, lightweight and easy to fit on the bike. No computer necessary to modify fuel management. Fully adjustable computer compatibility for ultimate tuning and personalization. Software is compatible with...

Plug-n-play fuel management device pre-programmed with make/model specific maps. Use OEM-style connectors and high-quality wiring harnesses. Small, lightweight, and easy to fit on your machine. No computer necessary to modify fuel management. Fully adjustable computer capability for ultimate tuning and personalization. Software is compatible with...

Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use.

Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use. Allows you to activate a Power Commander for changing maps on the bike while disconnected from the bike. For limited use.