All Products

High-quality tie-downs with a built-in soft strap extension. 1" W x 7' L straps are a foot longer than standard. Durable rubber-coated hooks with exclusive Moose Racing imprinted webbing. 1,350 lb. strength. Sold in pairs. Made in the U.S.A.

The Kenai Series Adventure Luggage by Moose Racing is a complete luggage solution featuring high-quality hardened aluminum side and top cases. The system is designed for durability with an anodized finish, waterproof seals, and an integrated lock system. A full range of model-specific mounting kits and optional accessories are available to...

Each kit includes the lower shock bearing, all the shafts, seals and spacers in the link, link arm and lower shock mount. 52100 bearing steel and hard-plated spacers resist wear and rust.

Kit includes the shock bearing, seals, spacers, and pins (if required) to rebuild the upper shock link. Premium design and construction stands up to tough conditions. Older bearing and seal designs updated to the latest in bearing technology.

Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool. Keeps engine performance and sound levels more consistent. Designed to fit cores from 1.75" to 2.125". Increases intervals between re-packs by 3 to 5 times. Made in the U.S.A.

The latest in muffler packing technology. Contains Competition Muffler Packing in a universal, easy-to-install design. Pillow can be trimmed to length to fit muffler up to 20" long. Lasts 3-5 times longer than traditional packing. Resists breakdown up to 1,100 F. Made in the U.S.A.

A fanny pack designed for carrying tools and essentials, featuring a spacious main compartment free of pre-determined tool mounting points. Made from rugged, flexible 600-denier material that conforms to your body. Includes a quick-release belt buckle for waist sizes 28" to 48", a front fold-down flap for protection, and a variety of elastic bands...

Constructed with heavy-duty 600D oxford polyester woven materials and internal closed-cell foam walls. Features a large main compartment, a boot compartment, and two side zippered pockets for gear storage. Includes reinforced grab handles and a padded, removable, adjustable shoulder strap. Dimensions: 34.5" L x 16" W x 20" H.

Features folding shields for unexpected quick departures and is the strongest independent-mount handguard system available. A great alternative to wraparound systems for woods or MX, with billet aluminum mounts and a reinforced backbone on the shield. Includes shields, mounts, and hardware. Made in the U.S.A.

Protect your shocks from mud, moisture and debris. Made of durable 400D nylon cloth with a strong, durable 2" hook-and-loop closure strip and high-strength elastic on both ends. Features four vented holes for improved air circulation. Available in black and made in the U.S.A. Sold in pairs, unless noted.

Perfect for high-temperature applications. Ball bearing and barb fastening assembly locks tightly and will not slip. Two lengths available; sold in packs of five. Made in the U.S.A.

Features a single compound and pattern design. A special U.S.-made compound feels soft but wears like a harder compound. The half-waffle pattern has high-traction chevrons, while wire grooves do not interfere with grip comfort. An extra-thick end cap provides increased strength. Features small flanges for thumb/trigger throttles. Sold in pairs....

Constructed with durable 600D polyester oxford woven material, this backpack has over 9.8L of cargo capacity. Features a foam-padded, fleece-lined laptop pocket, an external zipper phone pocket, two mesh bottle pockets, and fully adjustable shoulder and sternum straps. Includes a durable, easy-to-fill 3L bladder with an angle bite valve....

Keyed switch. Red = open, Off = closed. Keyed switch. Red = open, Off = closed.

Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm wide housing, wire length is 21.5". Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm...

Universal for both bikes and ATV. Switch can be used for almost any accessory. Switch specs: wire length 20"; width 22 mm. Universal for both bikes and ATV. Switch can be used for almost any accessory. Switch specs: wire length 20"; width 22 mm.

Classic double-wire hose clamps for fuel or vacuum lines. Quality plated steel for long-lasting durability and function. 15-piece assortment pack offers five each of 1/4", 3/8", and 1/2" ID size. 150-piece assortment pack offers 50 of each size. Made in the U.S.A.

High-quality tie-downs that last. Two oversized, high-strength rubber-coated hooks. 6' long straps are printed with Moose Utility Division logo. Standard and ratchet styles sold in pairs. Made in the U.S.A.

Prevents loss of coolant due to overheating. Works on most water-cooled motorcycles, snowmobiles and ATVs. Designed for hot weather and/or high-altitude riding conditions. Features a compact, versatile, high-density polyethylene bottle with built-in mounting holes for multiple options. The bottle cap is constructed from chemical-resistant rubber...

Prevents loss of coolant due to overheating, ideal for most water-cooled motorcycles, snowmobiles, and ATVs. Specially designed for hot weather and/or high-altitude riding conditions. Features a compact, versatile, high-density polyethylene bottle with a chemical-resistant rubber cap. The kit includes the 275cc bottle, hose, clamps, mounting ties,...

Nylon-reinforced vinyl fuel line. Braided nylon within the tubing wall provides added strength and flexibility against kinking. Won't harm fuel lines. Flexible down to -25 F/-3.8 C. Maximum dry heat is 150 F/65 C. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use with fuel-injected engines.

Cable fittings for repairing or custom fabrication. Shop kit contains 195 of the most commonly used fittings, complete with storage box. Cable fittings for repairing or custom fabrication. Shop kit contains 195 of the most commonly used fittings, complete with storage box.

Exclusive formula developed for Motion Pro to provide the smoothest operation and longest cable life. Ideal for use with Motion Pro cable luber. Special blend of Redline® synthetic lubricants and rust inhibitors keeps your cables working smoothly in any weather condition from hot to cold, wet or dry.

For aftermarket and OEM spec applications. Cap for Mikuni VM26-34 mm carbs.

Replacement chain tensioner hardware for most stock applications of street and off-road motorcycles. Metric class (grade) 8.8 for outstanding wear and durability with a durable zinc-plated finish. Kit contains two M8 x 50 bolts with 10 mm hex heads and two M8 flange nuts with 12 mm hex heads. Replacement chain tensioner hardware for most stock...