All Products

A hardware set to add chrome accents to the back end. Includes four each: bolts, washers and lock nuts plus an Allen wrench. A hardware set to add chrome accents to the back end. Includes four each: bolts, washers and lock nuts plus an Allen wrench.

85-piece Stepless® clamp kit with an assortment of commonly used clamp sizes for cooling systems. Stepless clamps provide secure 360° clamping with no gaps. Specially formed edges reduce risk of damage to hose and hose barb. Narrow 9 mm band provides concentrated seal compression. Tampering is visible. Comes in a durable partitioned plastic box...

Required for installation of Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a Push In/Out engine switch and momentary 2-pole starter switch with two separate circuits. Includes wiring harness. Made in Italy by Domino. Required for installation of...

Quality 6061-T6 forged aluminum levers with a roller bearing in the clutch pivot for effortless operation. Designed to fit OE perch.

Y and T fittings in sizes from 3/16" to 1/4". O-clips in sizes from 5/16" to 7/16". Acetal fittings are strong and light. Ideal for the shop or home mechanic. Made in the U.S.A.

Safe for use with fuel-injected bikes. When connected, fuel will flow and when disconnected, fuel will not flow. Use dual shut-off for fuel tanks equipped with a crossover line. Capable of withstanding temperatures from -40° F (-40° C) to 250° F (121° C). These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings which...

Single or dual shut-off valves. When connected, fuel will flow; when disconnected, fuel will not flow. Use dual shut-off for fuel tanks with a crossover line. For fuel supply (tank to carburetor), use single shut-off. Available for 1/4" and 5/16" ID fuel line. Withstands temperatures from -40 to 82 °C (-40 to 180 °F). Utilizes Nitrile (Buna-N)...

Nylon-reinforced vinyl fuel line. Braided nylon within the tubing wall provides added strength and flexibility against kinking. Won't harm fuel lines. Flexible down to -25 F/-3.8 C. Maximum dry heat is 150 F/65 C. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use with fuel-injected engines. Features 1/4" NPT pipe thread on one...

Easy to apply and easy to remove from throttle tube and bars when changing grips. Exceptional bonding to metal, plastic composites, rubber, leather, vinyl, glass and wood. 20 g (0.71 oz.) tube is enough for multiple applications.

Model-specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a push in/out engine switch and momentary 2-pole starter switch. Model-specific design with prewired connector plugs into stock wire harness. Made in Italy by Domino.

For use with auxiliary fuel tank or other use requiring an in-line installation. Features double neoprene seals and O-rings for smooth and positive operation. PART #P537 is not recommended for engines over 200cc. PART #s P12-035 and P12-036 are not recommended for engines over 300cc.

License plate frame that lets others know you 'Race With The Pros'. Fits most 4" x 7" license plates. License plate frame that lets others know you 'Race With The Pros'. Fits most 4" x 7" license plates.

Certified to meet permeation emission standards of 15g/M2/day. On emission-controlled vehicles, check with dealer for state and local law before use. Robust multi-layer design and construction. Showcases little to no fuel vapor loss. Highly resistant to ethanol-blended gasolines up to 100%. Highly flexible, easy to install and offers excellent...

Certified to meet permeation emission standards of 15g/M2/day. Robust multi-layer design with a fluoropolymer liner compatible with up to 100% ethanol-blend gasoline. Highly flexible, easy to install, and resistant to swelling, hardening, and cracking. Ozone- and UV light-resistant. Wide temperature range from -28.9 to 73.9 °C (20 to 165 °F)....

Grade 5 hardware with zinc finish. Sold in an adjustable-selection box measuring 13 1/2" L x 9 1/4" W. Kit includes 10 of each size as listed. Grade 5 hardware with zinc finish. Sold in an adjustable-selection box measuring 13 1/2" L x 9 1/4" W. Kit includes 10 of each size as listed.

OEM-style replacement clutch and brake levers for a wide range of Suzuki and Yamaha motorcycle models. Available in Polished and Black finishes.

Stronger and more durable than vinyl fuel line. Use with any type of gasoline. Resists swelling and hardening. Resistant to direct sunlight, hardening and/or cracking. Flexible in temperatures from -37.9 C to 73.9 C (-35 to 165 F). Can be used with in-line fuel filters or petcocks. Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for...

Premium-quality fuel line, stronger and more durable than vinyl. Use with any type of gasoline. Resistant to swelling, direct sunlight, hardening and/or cracking. Flexible in temperatures from -37.2 to 73.9 °C (-35 to 165 °F). Stretches easily over fittings or petcocks. Sold in 25' rolls and 3' lengths. Made in the U.S.A. NOTE: Not for use with...

Updated design of the Motion Pro Push-Pull throttle with a die-cast aluminum housing and smooth painted black finish. Features stainless steel hardware. Perfect for smooth-bore conversions on street and race bikes. Includes nylon throttle tube with grip retaining ring and pop out end cap. Updated design of the Motion Pro Push-Pull throttle with a...

Constructed of fuel-flexible plasticized PVC tubing. Safe for use with any type of gasoline or alcohol-type fuel. Smooth, slick tube helps prevent interior buildup. Recommended for venting and overflow lines. Flexible down to -17 C (0 F). Maximum dry heat temp is 104 C (220 F). Sold in 3' lengths and 25' rolls. Made in the U.S.A. NOTE: Not for use...

Replacement Push/Pull Throttle Cables for REV2 Throttle and Kits. Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight. Upper section of cables use 6 mm housing to provide solid support of adjusters.

The 3rd generation Motion Pro Revolver variable rate throttle system. Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions. 5 different reels provide perfect throttle response for any condition. Slim REV3 throttle housing allows more room for lever clearance and adjustment. Improved throttle...

Ergonomically designed grips with a medium-density TPR compound for excellent feedback and control. Features a full diamond pattern for unparalleled feel in wet and dry conditions. The inner diameter is optimized to keep grips secure. Sold in pairs. Ergonomically designed grips with a medium-density TPR compound for excellent feedback and control....

Replaces most speedometer cable inner wire (0.125"). Includes tips and tools to finish the cable. Available in 50" or 92" lengths.

Kit includes six sprocket bolts (8 mm), six Fuji metal-locking nuts (8 mm) and six flat washers (8 mm). Pre-applied thread locking agent on sprocket bolts and factory-style Fuji lock nuts create a double-locking design that keeps the hardware tight and secure. Metric class (grade) 10.9 for outstanding wear and durability. Durable zinc-plated...