New Products

Features full front-and-back heating to the fingertips. Reinforcement layers added for extra grip and abrasion resistance. Index finger is conductive for smartphone use. Includes TPC molded cinch strap, reflective piping, Cyberian Cordloc system, and a chamois thumb. Max temperature of 57°C (135°F) with a three-level on-board controller. Heat...

A hybrid system allowing power from a vehicle's 12V electrical system or Gerbing's 12V hybrid lithium-ion battery pack (sold separately). Features drum-dyed aniline cowhide leather on the palm and nylon on the back of the hand. Includes an Aquatex™ waterproof and breathable internal membrane, soft tricot fleece lining, 150g 3M Thinsulate™...

Versatile and weatherproof glove liners with Microwire™ heating elements. Made from moisture-wicking, hand-washable, anti-bacterial-treated stretch polyester. Features a long gauntlet intended to fit under other gloves. Designed to be used with 7V or 12V heated jackets, batteries, or connected directly to your vehicle. Temperature controller...

Women's heated gloves with premium aniline cowhide leather construction and Microwire™ heating throughout, including the top and bottom of each finger. Features an Aquatex™ breathable water-resistant membrane, 150g of Thinsulate™ insulation, impact-protected gel pads at palm, and adjustable velcro wrist closure. Power: 12VDC @ 1.1A each. Max...

Women's heated glove liners designed to be worn under other gloves for added warmth. Heating elements are positioned along fingers and thumbs. Features a 3-setting temperature control button, waterproof zippered battery pocket, and heat that lasts up to 5 hours. Includes two rechargeable 7V 2,200mAh batteries and one charger kit. Can reach a...

Women's battery-heated gloves with full front-and-back heating that runs all the way to the fingertips, using Microwire™ heat technology. Features an Aquatex™ water-resistant membrane, three-level on-board controller, and highloft insulation (270g top of hand, 170g palm). Includes two 7V batteries and a dual wall charger. Heat lasts up to 8...

Latex and powder free 5mm thickness nitrile gloves. Textured for a superior grip in wet or dry conditions, with a beaded cuff to decrease tearing. Sold as 100 gloves per individual box; 10 boxes per master case.

Easy slip-on style knee guards made from moisture-wicking and breathable stretch fabric. Features a mesh panel on the back for ventilation and an elastic closure to adjust fit. Includes impact foam inserts for protection, silicone grip on the top and bottom to keep guards in place, and non-fading sublimated graphics. Sold in pairs.

Soft impact protector mounted in a fabric sleeve that comfortably fits under riding gear. The impact protector is removable for easy washing. Features an Airprene® panel for airflow, vented nylon mesh for breathability, and an adjustable strap with hook-and-loop closure for a secure fit. The backside of the pad is sculpted for increased mobility,...

Soft impact protector mounted in a fabric sleeve that comfortably fits under riding gear. The impact protector is removable for easy washing. Features an Airprene® panel for airflow, vented nylon mesh for breathability, and an adjustable strap with hook-and-loop closure for a secure fit. The backside of the pad is sculpted for increased mobility,...

A lightweight belt featuring a perforated biofoam and airprene chassis with an ergonomic design that contours to the body. TPR panels enhance structure and support. It includes dual-pull elastic support straps, a hook-and-loop belt, rear foam padding, and moisture-wicking materials.

A protective guard with stretch mesh construction for a comfortable fit and optimal breathability. Includes pocketed chest, back, shoulder, and elbow impact pads, all of which are removable for cleaning. Features a full-length zipper for easy entry and a Lycra® collar with flat-stitched seams to minimize irritation. Garment certified to EN...

A protective guard with a four-way stretch poly-mesh chassis for mobility and cooling. Features removable impact protection pads, a full-length zipper, and a Lycra collar with flat-stitched seams. The complete garment is tested and certified to EN 17092-6:2020. Elbow/shoulder protection meets EN 1621-1:2012 Level 2, back protection meets EN...

Fully insulated waterproof 300D chassis with 200g insulation for maximum warmth. Features microporous coated fabric, seam-sealing, a durable water-repellant coating, and a comfortable nylon taffeta hanging liner. Includes full-length side leg zippers, side leg zipper for venting, full-length bib waist with side stretch panels, adjustable bib...

Fully insulated waterproof 300D polyester chassis with YKK® zipper vents at underarm. Features insulation for maximum warmth performance (200g throughout jacket), microporous coated fabric, sealed seams, and a durable water-repellant coating on the outer shell. A smooth and comfortable nylon taffeta liner is quilted to hold insulation in place....

A complete range of power accessories and components for Gerbing heated apparel. Includes replacement batteries, temperature controllers, chargers, harnesses, plugs, and extension cords to power and customize your heated gear setup.

A collection of high-performance heated gloves and glove liners by Gerbing. Featuring Microwire™ heat technology and available in various styles for men and women, with both 7V battery-powered and 12V vehicle-powered options to ensure warmth and comfort in cold conditions.

Keep your feet warm with Gerbing's line of heated footwear, including sock liners, wool socks, and rechargeable insoles. Utilizing Microwire™ heating technology, these products offer evenly distributed heat and are available in various power options (3V, 7V, 12V) for any cold-weather activity.

Waterproof sport gloves with traction grips on the palms, index finger and thumbs. Features a dual pocket system for customized placement of included Heat Pax™ hand warmers, providing 8+ hours of heat. Ideal for outdoor recreational activities.

Battery powered heated sport gloves from IonGear. Heating elements are built directly into the glove and extend along the entire finger and back of the hand. Each glove has its own battery with a multi-level temperature controller.

Advanced polycarbonate composite shell designed using CAD technology for the best fit possible. The Advanced Channeling Ventilation System (ACS) pushes heat and humidity out of the helmet with thirteen vent holes. It features a removable and washable SuperCool® liner, a large eyeport for maximum visibility and superior goggle fit, and a sliding...

A lightweight advanced polycarbonate composite shell helmet designed with advanced CAD technology for superior fit and comfort. Available with a dual-lens or dual-lens electric shield, which comes with a power cord and optional shield vent plugs. Features an anti-scratch coated amber sunshield with a dynamic multi-step positioning. Cheek pads are...

Noise reduction rate of up to 24 decibels, helping to protect your hearing from wind and engine noise. The integrated precision filter reduces wind noise while allowing normal conversation without filtering important traffic sounds. Made from medical-grade silicone-free material, providing a comfortable fit for extended wear. Filters are...

Replacement visors, liners, and cheek pads for Youth Thor Fleet Helmets. Visor kits include color-matched visor, external vents and visor screws.

The Reflex Sport Carbon helmet features a carbon shell with pre-impregnated carbon fiber material sheets to increase strength and decrease weight. It includes a dual-density EPS liner with integrated Koroyd® impact technology and the MIPS® Brain Protection System to reduce harmful forces from certain impacts. Comfort features include contoured...