New Products

LED cross feed prevention harness for single indicator motorcycles. Eliminates cross feed from left to right turn signals when using LED turn signals. Required when using Big Bike Parts marker lights or any aftermarket LED lights as turn signals. LED cross feed prevention harness for single indicator motorcycles. Eliminates cross feed from left to...

Allows the replacement of OEM turn signals. Works with 8 mm or 3/8" threaded stud mount in place of OEM turn signals. Sold in pairs. Allows the replacement of OEM turn signals. Works with 8 mm or 3/8" threaded stud mount in place of OEM turn signals. Sold in pairs.

Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8 mm or 3/8" threaded stud mount. Sold in pairs. NOTE: Kit does not include turn signal adapters (sold separately). NOTE: Some cruiser models may need a single LED splitter indicator. Turn signal relocation inserts allow replacement of OEM turn signals with...

Polycarbonate construction marker lights in various sizes. Includes rubber grommet and connector. Available in amber, red and clear. DOT/SAE approved.

Plug-and-play adapter kit to quickly install LED turn signals. Simply unplug your stock signal wire, plug the adapter in and plug in the LED turn signal. Plug-and-play adapter kit to quickly install LED turn signals. Simply unplug your stock signal wire, plug the adapter in and plug in the LED turn signal.

Add visibility for safety and style. Spotlights come pre-installed on the lightbar. Just buy it, bolt it on and plug it in. Accepts stock turn signals. Made in the U.S.A. NOTE: Lightbars are designed for fitment on stock motorcycles. Installation of a windscreen may cause clearance problems.

Provide hassle-free mounting of Custom Dynamics driving lights with a 5/16" mounting hole. Designed with a setscrew for secure mounting. Allen wrench included. Sold in pairs.

Small in stature but big on brightness. Uses LED technology for excellent visibility in a variety of conditions. Small in stature but big on brightness. Uses LED technology for excellent visibility in a variety of conditions.

Small in stature but big on brightness. Uses LED technology for excellent visibility in a variety of conditions. Low beam dimensions: 41 mm in dia. x 57.2 mm D. High beam dimensions: 41 mm in dia. x 58.4 mm D.

Increases visibility with 30W, 3000 lumen driving lights. This compact set mounts on any 1 1/4" engine guard, engine guards and handlebars, and will also work inside fairings or on a light bar. Features anodized aluminum housings and swivel mounts with 6mm bolts. Kit includes lights, 1 1/4" clamps, switch, relay and all wiring. Works on any 12V...

High-output LED driving lights designed for Honda GL1800 Gold Wing models. These kits are designed to integrate cleanly with the motorcycle's lower cowls.

Dual CREE LED driving lights that illuminate over 1,000 feet ahead with 6000K color bright light. Feature a built-in visored bezel and shallow depth. The kit attaches to existing lower fairing mounting holes with included hardware and also includes a separate wire harness to isolate the circuit.

LED marker lights designed for the Can-Am Spyder RT saddlebags to enhance style and visibility. Sold in pairs. LED marker lights designed for the Can-Am Spyder RT saddlebags to enhance style and visibility. Sold in pairs.

Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights. Internally routed wiring ensures a clean look. Available in 3 1/2" 55W halogen bulb. Include an on/off switch that can be mounted in a side cover. Cast...

The first formed trunk light ever for the Spyder. Features running, brake, and sequential turn signal light. Forms tightly around the contour of the trunk for a clean, highly engineered, custom look. The brilliant, advanced LEDs look right at home with the Spyder stock lights. Plug N' Play installation, harness sold separately. Lights measure 12"...

Custom-designed to fit precisely in place of the Slingshot OEM reflector light. Boosts visibility by 330° without altering the look of the Slingshot. Features Plug N' Play installation, heavy-duty 3M double-sided tape, and is IP65 rated. Measures 2" W x 3 3/4" T. Custom-designed to fit precisely in place of the Slingshot OEM reflector light....

Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black mounting brackets, switch, relay, wire harness, wire ties, and necessary hardware. 10 mm mounting hole allows easy mounting of most lights with bolts up to 3/8". Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black...

Popular 2 3/8" LED Auxiliary Spotlights for the lower front fairing of the Can-Am F3. A pair of brackets easily secures to the lower fairing into existing mounting holes, giving these auxiliary lights a floating effect. The LED spotlights deliver 490 lumens with 5000K color. The dimmable design comes with a dedicated wire harness including a...

A collection of mounting hardware for light bars. Includes cradle mounts for the DRC series and other universal fitment hardware.

Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting or driving lights. No warm-up, lights are instant on/off with a long life rated to over 50,000 hours. Features an oversized heat-sink and a cast aluminum body with stainless steel hardware. Standard two-wire connection to any 12VDC input. 4 Watts, 0.3 Amps, 750...

Complete the look of a new spotlight set-up with a stamped chrome steel visor. Features one universal spotlight size. Complete the look of a new spotlight set-up with a stamped chrome steel visor. Features one universal spotlight size.

Features a smooth chrome housing with a diamond-style clear lens and reflector optics. Includes a matching finish mounting block and H4 bulb. DOT compliant. Features a smooth chrome housing with a diamond-style clear lens and reflector optics. Includes a matching finish mounting block and H4 bulb. DOT compliant.

Classic style headlights with modern features. Features a bottom-mount design with a matching-finish mounting block, smooth housing, and a clear lens. Uses a standard H4 bulb. DOT compliant.

A 5 3/4" bottom-mount headlight with a built-in visor and a blue high beam indicator light. Includes a 12V, 55/60W H4 halogen bulb; a replacement is available separately. DOT compliant. A 5 3/4" bottom-mount headlight with a built-in visor and a blue high beam indicator light. Includes a 12V, 55/60W H4 halogen bulb; a replacement is available...

Designed for custom applications with a mounting block at the back of the housing. Includes the mounting block and a 55/60W H4 bulb system; replacement bulbs are available separately. DOT compliant.