New Products

Replacement starters that meet or exceed OEM specifications. They are 100% OEM interchangeable with no modifications needed for installation. Features include double-sealed bearings, heavy-duty clutch drive, and heavy-duty epoxy sealed welded armatures.

White braided flex sleeving with a 3/8" ID. Comes in a 10' length. Made in the U.S.A. White braided flex sleeving with a 3/8" ID. Comes in a 10' length. Made in the U.S.A.

A mini ATC fuse holder that features a waterproof boot. Comes with a 3A fuse and is sold as a 5-pack. A mini ATC fuse holder that features a waterproof boot. Comes with a 3A fuse and is sold as a 5-pack.

Superior connection to crimping. Wire ends are locked between opposing cone shapes when hand tightened.

Heat shrink tubing available in four sizes and two lengths.

Effectively prevents your engine's rpm from exceeding a predetermined limit. It is continuously adjustable from 6000 to 12,000 rpm with a smooth, precise limiting action. Has expanded capabilities and will work with most 4-cylinder inductive engines. Effectively prevents your engine's rpm from exceeding a predetermined limit. It is continuously...

A simple chrome kill switch and clamp that replicates Lucas switches of years past. It grounds the circuit when pressed (normally open) and is easily installed. No wire leads included. Fits 7/8" handlebars and is sold each. A simple chrome kill switch and clamp that replicates Lucas switches of years past. It grounds the circuit when pressed...

Direct OEM replacement ignition switches. Two keys included.

Exact OEM-style kill switches that plug into the stock wire harness for a variety of Honda, Kawasaki, Suzuki, and Yamaha models.

Classic red button kill switch with an aluminum housing. Used on some OE applications, it includes a 24" long wire harness and fits 7/8" handlebars. Grounds circuit when pressed (normally open). Sold each. Classic red button kill switch with an aluminum housing. Used on some OE applications, it includes a 24" long wire harness and fits 7/8"...

Three-position switch (off/ignition/ignition w/ lights) with sturdy, die-cast housing. Includes two keys and two threaded nuts for proper mounting. Requires a 3/4" (19 mm) diameter hole for mounting. Three-position switch (off/ignition/ignition w/ lights) with sturdy, die-cast housing. Includes two keys and two threaded nuts for proper mounting....

Heat-sealable style butt splices that create a watertight seal. Sold in 25-packs.

Top-quality brand-new replacement ignition condensers for various Honda models. Individually bagged.

Charge your USB-C devices on the move with these adapters. Features integrated rubber charging port covers to prevent damage from dirt and dust.

Heavily walled and adhesive-lined heat shrink tubing to keep splices dry. Works well for battery lugs or aftermarket ignition switch terminals. Comes in 4' lengths and is sold in a 4-pack. Made in the U.S.A.

A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws. A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws.

1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs. 1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs.

An inexpensive way to connect wiring. Fully insulated PVC construction. Available for 18 to 22 gauge or 14 to 16 gauge wiring. Sold in 25-packs.

An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs. An inexpensive way to connect wiring. Fully insulated PVC construction. Sold in 25-packs.

A universal connector kit that includes 2-place, 3-place, 4-place and 6-place male and female crimp style connectors. Works with 14 to 20 gauge wire. A universal connector kit that includes 2-place, 3-place, 4-place and 6-place male and female crimp style connectors. Works with 14 to 20 gauge wire.

A must-have when adding electrical accessories. Connects to the battery positive terminal and provides six additional separately fused circuits. Uses standard ATC plug-in fuses (sold separately) and includes an #8 battery hook-up wire. Measures 3" L x 3" W x 1/2" H. Made in the U.S.A. A must-have when adding electrical accessories. Connects to the...

A plug-and-go electronic fuse block designed specifically for the Can-Am Spyder RT 20-24. Features eleven terminal tie-in points protected by nine separate relays and fuses. Includes connections for turn signals, running lights, brake lights, always-on, and keyed power. Comes with a sub harness with OEM connectors for seamless connectivity. A...

Plug-and-go electronic fuse blocks featuring eleven terminal tie-in points electronically protected by nine separate relays and fuses. Includes connections for turn signal, running lights, brake light, always on and keyed power. The entire system is protected by a 20A fuse and a separate 30A relay to isolate accessories. Comes with sub harnesses...

Direct OEM replacement brake light switches for Honda, Kawasaki, Suzuki, and Yamaha models.

Direct plug-in OEM replacement. Replaces Honda OEM #s 31600-MV4-000 and 31600-MV4-010. Direct plug-in OEM replacement. Replaces Honda OEM #s 31600-MV4-000 and 31600-MV4-010.