New Products

Side shields designed to attach to the ends of plow blades to help reduce snow and dirt overflow. Available for Pro-Series and Pro-Poly blades in boxed or tapered styles.

A collection of plow skids, curb guards, and foot brackets to improve plow performance and longevity. Includes parts for KFI and Cycle Country plows.

A collection of various replacement parts, accessories, and conversion components for KFI, Cycle Country, and Hybrid plow systems. Includes push tubes, mounts, brackets, stiffeners, and general hardware.

Replacement wear bars for plow blades, available in ultra-high molecular weight polyethylene (UHMW) or powdercoated steel. Hardware kits also available.

These kits help prevent uneven wearing of the wear bars when the blade is rotated and enable proper blade angle and plowing geometry. Designed to bolt onto your existing tube system, they are constructed of grade 50 steel and include all necessary hardware.

Designed for use with the KFI Pro-V Plow System, this kit allows you to manually angle your Pro-V Plow System with the included angling tubes. Can be used in place of the hydraulic actuator PART #4501-1126.

This harness consists of wires, connectors, protective sheathing, and insulation to provide secure and reliable connections within the hydraulic actuator system. It is specifically designed for use with KFI hydraulic actuator PART #4501-1126 and includes a complete wiring kit with a Carling Technologies two-way dash rocker switch, which is not...

Replacement 1/8" poly sheets for KFI Pro-Poly blades. Each sheet includes a replacement decal. Made in the U.S.A. Available for blades from 60" to 72".

A replacement blade foot designed to work with the KFI Sno-Devil plow. Made from 1/4" grade 50 steel and is zinc-plated. Hardware is not included.

A replacement rod end linkage with zinc-plated steel construction. It is designed for the KFI manual lift PART #4501-1106. Made in the U.S.A.

The Sno-Devil plow system and related replacement components for ATVs. The complete system includes a universal hybrid mount, 48" blade, and push tubes. Requires a winch for lifting.

Two-way adjustable snow plow flap kits to increase blade height and control snow flow. Kits include an 11ga steel edge strip, a 6.5" rubber flap, and all mounting hardware. Replacement hardware is also available.

Increase your blade end visibility for added safety with these plow marker kits. They bolt to the side/ends of your blade and include two markers per kit. Available in Pro-Series or Pro-Poly styles. Poly markers feature a steel 89° angled base.

This kit works with UTV push tube PART #4501-1004 (sold separately). The locking pin comes assembled in the kit. You must reuse the original hardware. Drilling is required for installation. Made in the U.S.A.

This lever lift repositions the lift attach point to help reduce winch and cable strain from lower mounted winches and bad cable angles. It is fully adjustable for multiple angles and attach points. Designed to work with KFI UTV push tubes only and will not work with a plow actuator. Constructed of heavy-duty 3/16" grade 50 steel, shot-blasted,...

Replacement brackets specifically designed for use with KFI UTV tubes and open trail tubes on vehicles with a UTV track extension. These powdercoated tough brackets are made in the U.S.A. and require drilling for installation. Does not include the tube system or actuator (sold separately).

A 60" universal plow system that includes a universal hybrid mount, 60" blade, and push tubes. Features a 14ga steel blade, powdercoated finish, and adjustible heavy-duty skid pads.

An 80-inch wide V-plow for UTVs, featuring a steel structure with a replaceable poly face, dual curvature for moving snow, and adjustable height skids. Made in the U.S.A.

A modular plow system for ATVs and UTVs with either tires or tracks. Build your complete system by selecting a plow blade, push tube, vehicle-specific mount, and other optional components like leveling kits or lift systems. See application charts for specific fitment.

Replacement lift arm of Grade 50 steel construction. Shot-blasted and powdercoated black for durability. Made in the U.S.A.

Extends ATV/UTV blade 5.32" forward. Constructed of heavy-duty 1/4" grade 50 steel and shot-blasted before being powdercoated black.

Kit includes both a hybrid plow mount and push tubes. The included tube system is 8.5" shorter than the standard ATV tube system.

Kit includes hardware kits, lift hook bracket, plow springs, pitch bushings, and hitch pins needed to attach the tube system to the blade.

Standard replacement ear for the PRO 2.0 Square Tube. Made from Grade 50 steel and powdercoated black. Sold as a set of two (both sides included). Mounting hardware included. Made in the U.S.A.

Grade 50 steel replacement tube weldment for the new PRO 2.0 Square UTV push tube. Shot blasted and powdercoated black for durability. Made in the U.S.A.