New Products

Quickly identify fuel type being used to avoid costly engine damage from using the wrong fuel. Fits any fuel container by attaching to the handle or under the spout. Use with Jerry cans™, Omega™, Scribner™, VPM, Spacesaver or any other utility can. Features a hook-and-loop tab that flips up to display the mix ratio. Made from heavy-duty,...

K&N® clamp-on air filter provides absolutely the best arrangement for good clean air and lots of it. What you need for all that extra horsepower fun. Universal in style, K&N snowmobile filter replaces the existing airbox and OEM stock filter.

Converts all lever-operated chokes to cable-operated systems. Mikuni PART #MK-412. Made in Japan.

This quality-made fuel line will not harden or crack. Fuel line is made of premium polyurethane. Made in the U.S.A. NOTE: Not to be used with fuel over 10% alcohol.

18" polyurethane fuel cap vent hoses. Soft, flexible and kink-resistant material. 54 piece tub; nine pieces of each of six colors (black, blue, green, orange, red and yellow). Sold each. Made in the U.S.A.

Self-tensioning wire hose clamps for fuel or vacuum lines. Made of zinc-plated, spring-tempered music wire for long-lasting durability and function. Made in the U.S.A.

Single or dual shut-off valves. When connected, fuel will flow; when disconnected, fuel will not flow. Use dual shut-off for fuel tanks with a crossover line. For fuel supply (tank to carburetor), use single shut-off. Available for 1/4" and 5/16" ID fuel line. Withstands temperatures from -40 to 82 °C (-40 to 180 °F). Utilizes Nitrile (Buna-N)...

For use with auxiliary fuel tank or other use requiring an in-line installation. Features double neoprene seals and O-rings for smooth and positive operation. PART #P537 is not recommended for engines over 200cc. PART #s P12-035 and P12-036 are not recommended for engines over 300cc.

Certified to meet permeation emission standards of 15g/M2/day. Robust multi-layer design with a fluoropolymer liner compatible with up to 100% ethanol-blend gasoline. Highly flexible, easy to install, and resistant to swelling, hardening, and cracking. Ozone- and UV light-resistant. Wide temperature range from -28.9 to 73.9 °C (20 to 165 °F)....

Premium-quality fuel line, stronger and more durable than vinyl. Use with any type of gasoline. Resistant to swelling, direct sunlight, hardening and/or cracking. Flexible in temperatures from -37.2 to 73.9 °C (-35 to 165 °F). Stretches easily over fittings or petcocks. Sold in 25' rolls and 3' lengths. Made in the U.S.A. NOTE: Not for use with...

316 SS corrosion-resistant hose clamps, appropriate for multiple applications including marine. Smooth concave-convex stamped band and flared edge prevents hose damage during installation. Slim 9 mm band with low-profile head design is perfect for tight applications. Material and clamping range are stamped on the band for easy identification. In...

Universal in-line fuel filters for 1/4" and 5/16" ID fuel lines. Designed for low pressure fuel filter lines. Compatible with standard, Race and E85 fuels. Sold to dealer as a display card of 20; sold to consumer as each.

Dash-mount plunger comes complete with necessary hose and T-fittings for single and dual carb applications. Made in the U.S.A.

Reshapes the top opening of your oil reservoir back to a perfect sealing surface, eliminating oily residue on the pull rope, exhaust, clutches or brakes. Makes removing and installing the oil cap easier. Wide top lip for large sealing surface; tapered bore for added strength. Complete with rubber O-ring for added sealing.

Kit includes all necessary O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat (needle jet and other pressed-in jets are not included in kit). Models with multiple carburetors include components to repair all carburetors. OEM jet sizes and slide needles are included in the kit. NBR rubber material is used...

Restore lost performance or non-functioning fuel pump with this economical solution. High-quality replacement vacuum-operated pump. Modern materials resist up to 10% ethanol.

Compact design for discrete placement and easy uninstallation to revert to stock settings. Easily change and upgrade tunes as you upgrade parts. Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride's potential. Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300....

Accessories for use with Dynojet Power Commander fuel management units, including map switches, autotune kits, and digital displays.

Plug-n-play fuel management device pre-programmed with make/model specific maps. Use OEM-style connectors and high-quality wiring harnesses. Small, lightweight, and easy to fit on your machine. No computer necessary to modify fuel management. Fully adjustable computer capability for ultimate tuning and personalization. Software is compatible with...

Genuine Mikuni main and pilot jets for tuning VM, TM, and TMX series carburetors. Sold in packs of 4, unless otherwise noted.

Great replacement flanges for Mikuni carburetors. Sold each. Made in Japan.

Genuine Mikuni replacement and tuning parts including needle and seat assemblies, jet needles, and needle jets for various Mikuni carburetors.

Genuine Mikuni fuel pump kits contain all gaskets, diaphragms, etc., required to rebuild Mikuni pumps. Made in Japan.

Genuine Mikuni replacement fuel pumps. Made in Japan.

Converts a VM-type Mikuni carb to a Power Jet carb (sizes 30 mm to 44 mm). Includes all parts needed to complete the conversion and three type N102/221 power jets (80, 100, 120) to get the tuning operation started. Mikuni PART #MK-406. Made in Japan.