Requires wire extension kit PART #4505-1105.

• Constructed of 3/16" steel
• Metal bead blasted and powder coated for best possible finish prep and durability
• Complete installation instructions and mounting hardware included
• 100% made in USA
• Roller fairlead and winch not included.
• Mount designed to work with the following winches:
• KFI: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / SE25 / SE35 / SE45-R2 / AS-50 / AM-25 / AM-35 / AS-25 / AS-35
• WARN: VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
• WARN: Vantage 2000-3000 lb / Provantage 2500-3500 lb
• RAMSEY: ATV2500 / ATV3000
• SUPERWINCH: LT2000 / UT3000 / Terra25 / Terra35 / Terra 2500 (SR) / Terra 3500 (SR) / A3500 / LT2500 / LT3000 / LT4000ATV / LT4000 (SR)
• MILE MARKER: PE2.5 / PE 3.5 / VMX2.5 / PE3500
• CYCLE COUNTRY: Work Power 2500 / Powermax 2500 and 3500
• BADLAND, CHAMPION: standard winches
• BADLAND, CHAMPION: 2-hole winches with additional purchase of Converter Mount #4505-1069
• KEEPER CORP. TRAKKER: KT2500 / KT3000 / KT2500C / KT3000C
• KEEPER CORP. TRAKKER: KT2000 requires roller fairlead with a 4.875" bolt pattern and additional purchase of Converter Mount #4505-1069
• SMITTYBILT: XRC 2.0 requires roller fairlead with a 4.875" bolt pattern and additional purchase of Converter Mount #4505-1069
• SMITTYBILT: XRC 3.0 / XRC 4.0
• XGEAR: X3000 / X4000 4-hole standard (3.00" x 4.875" bolt pattern)
• VENOM: 2000 / 2500 / 3000 / 3500 (hardcore series) with 3.00" x 4.875" bolt pattern mount-up
• VENOM: 4500 / 5000 (hardcore series) require additional #4505-1120 Spacer Plate with 3.00" x 4.875" bolt pattern mount-up
• QUADBOSS: RP25 / RP35
• Possibly many others with standard mounting pattern of 4-hole 3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern
• 2-hole Mounted winches with 3.10" bolt pattern require the additional purchase of the Converter Mount #4505-1069 and roller fairlead with a 4.875" bolt pattern
• This mount has the wide bolt pattern built in but is not recommended due to cable rub on the mount: 4-hole (3.00" x 6.60" bolt pattern with rollers that are 6.00" bolt pattern)