Motion Pro Pivot Suspension Vise

Designed to make suspension service simple and quick. Holds shocks and forks securely while you change oil, re-valve, or change seals. Pivoting head holds parts in any position, with mechanical stops every 45°. Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4-point grip system. Large side holds 39 to 69 mm diameter parts. Small side holds 14 to 39 mm diameter parts. Steel frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench. Movable fluid catch pan with mesh insert, and threaded drain bung. Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. Can be used to assist in removing fork compression valve assembly (use of stock front axle required). Holds shock firmly around shock body, shaft or shock reservoir. Facilitates removal of piston rod and seal head. Facilitates removal of shock reservoir caps, chamber pistons or bladder. Holds shock to remove spherical bearings or needle bearings. Holds shocks for removal of shock spring.

• Frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench
• Movable fluid catch pan with mesh insert, and threaded drain bung
• Soft jaw fork peg holds fork slider up for removal of dust seal and seal retaining clip
• Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
• Can be used to assist in removing fork compression valve assembly (use of stock front axle required)
• Facilitates removal of piston rod and seal head, and shock reservoir caps, chamber pistons or bladder
• Holds shocks and forks securely while you change oil, re-valve, or change seals
• Pivoting head holds parts in any position, with mechanical stops every 45°
• Aluminum soft jaw vise holds cylindrically shaped parts utilizing a 4 point grip system
• Large side holds 40 mm to 61 mm diameter parts, small side holds 16 mm to 34 mm diameter parts
• Designed to make suspension service simple and quick