Fill unsightly gaps between switch housings and grips. Performance Machine adapter allows the use of PM hand controls on most 1" OD diameter handlebars. For both left and right applications. Made in the U.S.A. NOTE: Some handlebars may require slight filing for proper fit.

Dual cable, snap-in style throttle housings. Your choice of chrome or black anodized finishes. For 1" outer diameter handlebars. Made in the U.S.A.

7/8" external diameter to fit all standard-sized clamps and controls. Exclusive aerospace aluminum 7010-T6 alloy is precisely engineered for the best combination of strength and fatigue reduction. High-impact strength, lightweight, and absorbs vibration. Anodized to protect against corrosion. Available in black.

Aluminum 7010-T6 construction with an unbraced design, shot-peened anodized finish, and a laser-etched positioning grid. Features a tapered outer wall design with a 1 1/8" clamping diameter and 7/8" control ends. Bar pad not included.

The Renthal 843 Fatbar (Flat Track 130) is the first dedicated Flat Track handlebar from Renthal. A unique bend, purpose-built and developed for single and twin cylinder Flat Track motorcycles. It combines 812 mm of width with 127 mm of height and 100.5 mm of sweep to provide riders with perfect control and optimal leverage. The Renthal 843 Fatbar...

Ultralight CNC-machined from 2011-T3 aluminum. Each set includes an extra adapter sleeve for mounting in either aluminum (14 mm ID) or steel (17 mm) handlebars.

Fork clamps machined from 7075-T6 billet aluminum and anodized black for a factory look. Tubes are machined from 7010 aluminum and hard anodized for wear resistance. Features laser-etched positioning marks, 7/8" diameter tubes, and removable nylon bar end inserts. Primarily for race use.

Moves handlebars 1 1/2" up and 1" back or forward from the OEM position. Designed to work on any bike with a stock 1 1/8" Fatbar, parallel OEM bar clamps and open mounting area. Machined from 6061-T6 aircraft-grade billet aluminum. Includes mounting hardware, instructions, and step shims. Made in the U.S.A.

Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish. Includes mounting hardware and works with stock cables. Made in the U.S.A. Provides 1 1/2" of total pullback, moving the bar approximately 1 1/4" up and 3/4" back from the OEM position. Clear anodized finish....

1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish. 1 3/4" center-to-center rise with 26 mm stem. Pivot forward or backward depending on rider preference. Black anodized finish.

Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear finish. Made in the U.S.A. Sleek, stylish design risers that fit most applications with 7/8" handlebars and a 7/8" bar clamp. Machined from billet 6061-T6 aluminum with an anodized clear...

2" rise risers that fit many makes/models of cruiser bikes with a 1" diameter bar and an open mounting area. Machined from 6061-T6 aluminum. Risers do not work on Yamaha V-Star 1300. Made in the U.S.A.

Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem, accepts 1 1/4" handlebar. Designed to use the stock BMW caps/bolts on the top of the risers. Work with stock cables. Made in the U.S.A. Reduces bar vibration and hand tingling/numbness. Risers pivot Forward/Backward. 2" of rise, 1 1/4" stem,...

Pivoting riser kits that can be positioned forward, backward or anywhere in between. Bottom fits 1" handlebar clamps; 1" bar clamp on the top side. Constructed from aircraft-grade aluminum (6061-T6). Made in the U.S.A.

Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black anodized finish. Made in the U.S.A. Very easy installation with a lifetime warranty. Provides 1 1/2" rise and moves the handlebar 1.5" up and 1.2" back. Works with OEM cables and lines. Black...

2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on rider preference. Works with stock cables. Comes with low-profile caps to replace the OEM bar clamp caps. Features clear anodized finish. Made in the U.S.A. 2" rise with 1 1/4" stem. Accepts 1 1/4" handlebars and pivots forward or backward depending on...

2" center-to-center rise with 1 1/8" stem. Pivots backward/forward based on rider preference and accepts 1 1/8" handlebars. Extended stem on the bottom portion of the riser makes for a great fit for bikes with angled handlebar clamps.

Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position. Engineered and tested for maximum strength and durability. CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks. Made in the U.S.A. Note: Longer cables may be required when installing handlebar risers on some models.

Unique design allows for installation in either direction. 1" offset means bar can be moved closer or further away. Reducers lock into risers to ensure no slippage between components. Risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8 mm bolt threads. Made in the U.S.A.

Replaces oversized black washers with stylish die-cast end caps. Greatly enhances the look of the handlebars. Designed to fit older models as well as the grip ends used since 2013. Dampens vibration of the handlebars. Increases handlebar weight by approximately 8 oz.

Provides easy repositioning of handlebars with three positions to enhance comfort. Made from billet aluminum. Maximum of 1 1/8" of backward adjustment and 1 3/8" upward positioning from stock. All hardware and instructions are included. Provides easy repositioning of handlebars with three positions to enhance comfort. Made from billet aluminum....

Billet aluminum riser shims adjust handlebars 7/8" forward and 3/4" up or 7/8" back and 3/4" from stock position. Mount between handlebars and forks. Sold in pairs. Billet aluminum riser shims adjust handlebars 7/8" forward and 3/4" up or 7/8" back and 3/4" from stock position. Mount between handlebars and forks. Sold in pairs.

Provides easy handlebar repositioning with two positions for enhanced comfort. Made from billet aluminum, providing up to 2" of upward positioning and 7/8" forward/backward adjustment. Includes all necessary hardware and instructions. Provides easy handlebar repositioning with two positions for enhanced comfort. Made from billet aluminum,...

Race-proven technology clip-on handlebars machined from solid billet with a removable handlebar. Handlebar can be replaced without buying an entire new clip-on assembly because handlebar is not welded to clamp. Clamp is CNC machined from a solid block of 7075-T6 aluminum. Kit includes both collars, two handlebar tubes with plastic ends and high...

Trick-looking yet functional lever guards for any street or race bike. Machined from 6061 billet aluminum with a black anodized lever guard and Ti-copper anodized mount. Features approximately 1/2" of length adjustability. Mounts to the end of any 7/8" handlebar with a 1/2" wide mount. NOTE: To properly mount, you need to slide your grip up 1/2"...