Attaches to the end of any throttle grip utilizing a twist-grip throttle. Small adjustable paddle is positioned under the palm of the hand; XL version features a larger palm rest. Allows the rider to maintain a steady throttle position with a relaxed grip. When not in use it is easily removed without tools. XL style has a larger palm rest for more...

Great finishing touch for handlebars. Made from die-cast aluminum. Sold in pairs. Great finishing touch for handlebars. Made from die-cast aluminum. Sold in pairs.

Stylish wind protection for your hands. Mounts are E-coated aluminum, guards are rubber isolated. Made of Lucite in and black opaque. Includes black mounting hardware. Stylish wind protection for your hands. Mounts are E-coated aluminum, guards are rubber isolated. Made of Lucite in and black opaque. Includes black mounting hardware.

Allows you to mount a Memphis Shades Classic Deuce, Hell Cat, Demon or The Shooter windshield to a bike with 7/8" to 1" handlebars, or using fork clamps. Sold in pairs. Made in the U.S.A.

Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm wide housing, wire length is 21.5". Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm...

Required for installation of Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a Push In/Out engine switch and momentary 2-pole starter switch with two separate circuits. Includes wiring harness. Made in Italy by Domino. Required for installation of...

Model-specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a push in/out engine switch and momentary 2-pole starter switch. Model-specific design with prewired connector plugs into stock wire harness. Made in Italy by Domino.

The 3rd generation Motion Pro Revolver variable rate throttle system. Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions. 5 different reels provide perfect throttle response for any condition. Slim REV3 throttle housing allows more room for lever clearance and adjustment. Improved throttle...

A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws. A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws.

Add a little color to your ride; protect your grips and handlebars. Sold in pairs. Made in the U.S.A. Add a little color to your ride; protect your grips and handlebars. Sold in pairs. Made in the U.S.A.

Keep the grips clean when working on the bike or dry in rainy weather. Maintain that 'factory' new look. Sold in pairs. Keep the grips clean when working on the bike or dry in rainy weather. Maintain that 'factory' new look. Sold in pairs.

Replace black OEM bar end weights with chrome. Install in minutes with OEM hardware. Sold in pairs. Replace black OEM bar end weights with chrome. Install in minutes with OEM hardware. Sold in pairs.

3-button housing includes high-quality switches with 36" leads. Work exclusively with Performance Machine Contour hand controls. Sold each. Made in the U.S.A.

Fill unsightly gaps between switch housings and grips. Performance Machine adapter allows the use of PM hand controls on most 1" OD diameter handlebars. For both left and right applications. Made in the U.S.A. NOTE: Some handlebars may require slight filing for proper fit.

Designed to stop a runaway motorcycle if the rider is separated from it. Billet aluminum body, water-resistant switch, stainless internal components with 24" copper wire for dependable operation. For normally closed battery-type ignition. Made in the U.S.A.

Fits cleanly over your existing reservoir cover with a 1" ball centered. Made of die-cast aluminum with an over-molded rubber ball. Easy installation. Each kit includes black oxide SM420 screws (M4 x 20 mm), SM430 screws (M4 x 30 mm), and SM435 screws (M4 x 35 mm). Powdercoated marine-grade aluminum.

Ultralight CNC-machined from 2011-T3 aluminum. Each set includes an extra adapter sleeve for mounting in either aluminum (14 mm ID) or steel (17 mm) handlebars.

Made from laser-cut steel, these risers raise the stock floorboards and brake pedal by 1". Available in a black powdercoat finish. Made from laser-cut steel, these risers raise the stock floorboards and brake pedal by 1". Available in a black powdercoat finish.

Mounts bolt easily to the driver floorboards. Move foot position forward from the floorboard. Feature adjustable arms that offer a large range of motion and multiple mounting positions. Upper 3/8" holes accept all Rivco pegs and many others. Sturdy no-flex design made from 3/8" steel.

Strong, laser-cut steel construction mounts that allow an 8" range of motion for the driver's feet. Easily bolts to factory floorboards and is customizable with any Rivco peg set (sold separately). Strong, laser-cut steel construction mounts that allow an 8" range of motion for the driver's feet. Easily bolts to factory floorboards and is...

Beverage holder conveniently holds most beverage containers in its tapered design with a rubber-coated liner. Designed for easy installation and removal using a receiver bracket so that the beverage holder can quickly snap into place or be removed. Available in a satin black finish. Beverage holder conveniently holds most beverage containers in...

Satin black LED switch block assembly. Easily control auxiliary driving or marker lights. Satin black LED switch block assembly. Easily control auxiliary driving or marker lights.

Made from CNC billet-forged aluminum, these boards are strong, durable and great-looking. A copyrighted anti-rotation locking system allows setting the precise angle for increased comfort and will not move once set. Features a non-slip rubber surface and measure 6 1/4" x 4".

Left- and right-side, stamped-steel chrome control panel accents that attach with double-sided tape.

12V handlebar-mounted USB charger for MP3, GPS, iPads® and smartphones. Allows the simultaneous use of 2.1A and 1.0A ports. Handlebar clamp attachment fits either 7/8" or 1" handlebar. Socket assembly can also be mounted into a flat panel. 12V handlebar-mounted USB charger for MP3, GPS, iPads® and smartphones. Allows the simultaneous use of 2.1A...