Light bars featuring 12 super-bright LEDs with 3M™ double-sided tape for easy mounting. No load equalizer or resistors required.

Offer super bright chip-on-board white LEDs for license plate illumination. Simple two-wire installation with 18" wire leads. M-6 x 1" thread. Fit all models with 12VDC negative ground systems. Thread diameter is 0.232", length is 0.59". Head diameter is 0.469", height is 0.711". Sold in pairs.

Slim design light bar with 50 dual-intensity red LEDs. Comes pre-taped for mounting to any flat surface. Features a simple 3-wire hookup. Measures 7" L x 0.5" W x 0.4" H.

A color-changing LED accent light system. Kits include a wiring diagram, installation kit, and a Bluetooth-compatible Color Command remote control. The remote allows the user to select from seven pre-programmed colors, create a custom color, or rotate through all colors at various speeds and patterns. All accent lights are pre-taped with 3M tape...

A comprehensive collection of color-changing LED accent light kits for motorcycles, featuring solid color modes, music synchronization, and brake alert functions. Kits are available with different controllers and component configurations. Not for V-Rod models.

Controls Magical Wizards™ LED accent light system. Connects to the ProGLOW™ app through a personal iOS or Android device to customize and control color changing lights. Includes a push button main power switch, three independently controlled zones (front/mid/rear), and can sync with audio. Features solid color, color-changing modes, and color...

100% waterproof LED engine kits with high-output 5050 surface-mount single-function LEDs and a 120° viewing angle. Features 48" color-coded wire in high-temp protective black sheathing and attaches with pre-attached 3M™ adhesive tape.

A mini ATC fuse holder that features a waterproof boot. Comes with a 3A fuse and is sold as a 5-pack. A mini ATC fuse holder that features a waterproof boot. Comes with a 3A fuse and is sold as a 5-pack.

Superior connection to crimping. Wire ends are locked between opposing cone shapes when hand tightened.

Connects to the ProGLOW™ app through your personal iOS or Android device to customize and control your color changing lights. Features three independent controlled zones, a pushbutton main power switch, and audio sync capability. Optional brake alert function can be enabled for increased visibility. Connects to the ProGLOW™ app through your...

Watertight, plug-and-play color changing LED accent light strips for any 12VDC system. Pre-taped for mounting. Sold each. Requires ProGLOW™ Bluetooth® controller PART #2050-0440 (sold separately).

Watertight, plug-and-play oval disk wheel lights that provide 360° coverage. Pre-taped for mounting to the inside of the front wheel brake caliper. Sold each. Requires ProGLOW Bluetooth® controller (PART #2050-0440), sold separately.

Complete plug-and-play kits for color-changing LED accent lighting. All kits are pre-taped for easy mounting and include the ProGLOW™ Bluetooth® controller, wire splitters, caps and extensions. Features solid color and animation modes, color match technology, three independent zones, music synchronization, brake alert function, and battery...

Individual components for the ProGLOW™ color-changing LED lighting system, including light strips, wire extensions, and splitters. Allows for custom installations and expansions. All components are for universal 12VDC systems and feature watertight IP67 rated connectors.

A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are removed or replaced with LED. One module needed per motorcycle. Features adjustable load setting. Dimensions: 4.2" L x 0.6" W x 1.4" H. A no load, no heat load equalizer that prevents rapid turn signal flash when factory turn signal bulbs are...

Converts rear 1156/7507 turn signals to run-brake-turn function on 12VDC motorcycles with 2 rear turn signals. Works with LEDs or incandescent bulbs. Features 10 user-selectable brake light strobe/flash patterns, and 10 user-selectable running light intensities. Load Equalizer/Signal Stabilizer required (sold separately). Sealed weathertight case....

Optional accessory to convert two-wire TruFlex II® LED strips to a three-wire dual-intensity system (Low, High, and Ground). Sold separately.

Four times brighter than original TruFlex® lights. These highly flexible strips feature a unique faceted design to increase viewing angle. Available with red or amber LEDs in a choice of UV-stable amber, red, or smoke tubing. Each strip is pre-taped with automotive-grade tape. Strips are 0.33" W x 0.33" H. Sold each. NOTE: A dual converter is...

Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module. Dimensions: 14.6" L x 0.34" W x 0.30" H. Sold each. Designed to have running lights, brake lights, and turn signals all in one strip. Can be wrapped around a fender. Requires a run/brake/turn module....

Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs. Quick-disconnect for any two, three or four wire auxiliary lighting product. Features 22 AWG wires, 15" total wire length, and four-pin JAE connectors. Sold in pairs.

Wide-angle super-bright LED clusters. Each cluster has three wires (low, high, ground) and can be used as single or dual intensity. Sold each.

A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features overcurrent, thermal, short circuit, and reverse wiring protection. 84W, 12V system. Works with LED or incandescent bulbs. Dimensions: 2.25" L x 1.25" W x 0.5" H. A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features...

Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs. Converts 2-wire Custom Dynamics Wrap-Arounds™ turn signals to 3-wire, allowing them to function as both running and turn signals. Sold in pairs.

30,000V output. Available in single-fire or dual-fire applications. Requires custom mounting. Comes in a black casing.

Heat shrink tubing available in four sizes and two lengths.