Provide hassle-free mounting of Custom Dynamics driving lights with a 5/16" mounting hole. Designed with a setscrew for secure mounting. Allen wrench included. Sold in pairs.

Connects to the ProGLOW™ app through your personal iOS or Android device to customize and control your color changing lights. Features three independent controlled zones, a pushbutton main power switch, and audio sync capability. Optional brake alert function can be enabled for increased visibility. Connects to the ProGLOW™ app through your...

Watertight, plug-and-play color changing LED accent light strips for any 12VDC system. Pre-taped for mounting. Sold each. Requires ProGLOW™ Bluetooth® controller PART #2050-0440 (sold separately).

Watertight, plug-and-play oval disk wheel lights that provide 360° coverage. Pre-taped for mounting to the inside of the front wheel brake caliper. Sold each. Requires ProGLOW Bluetooth® controller (PART #2050-0440), sold separately.

Complete plug-and-play kits for color-changing LED accent lighting. All kits are pre-taped for easy mounting and include the ProGLOW™ Bluetooth® controller, wire splitters, caps and extensions. Features solid color and animation modes, color match technology, three independent zones, music synchronization, brake alert function, and battery...

Individual components for the ProGLOW™ color-changing LED lighting system, including light strips, wire extensions, and splitters. Allows for custom installations and expansions. All components are for universal 12VDC systems and feature watertight IP67 rated connectors.

Converts rear 1156/7507 turn signals to run-brake-turn function on 12VDC motorcycles with 2 rear turn signals. Works with LEDs or incandescent bulbs. Features 10 user-selectable brake light strobe/flash patterns, and 10 user-selectable running light intensities. Load Equalizer/Signal Stabilizer required (sold separately). Sealed weathertight case....

Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W. Replaces stock 2- or 3-pin flashers on most metric bikes. Only one unit needed when replacing stock turn signals with LEDs on front and rear. Maximum 120W.

Extremely versatile and flexible LED accent lights. Features 48" wires and are pre-taped on three sides for easy installation. Sold in pairs.

Optional accessory to convert two-wire TruFlex II® LED strips to a three-wire dual-intensity system (Low, High, and Ground). Sold separately.

Four times brighter than original TruFlex® lights. These highly flexible strips feature a unique faceted design to increase viewing angle. Available with red or amber LEDs in a choice of UV-stable amber, red, or smoke tubing. Each strip is pre-taped with automotive-grade tape. Strips are 0.33" W x 0.33" H. Sold each. NOTE: A dual converter is...

Dual density flexible LED strips designed for use as running, turn, or brake lights. Features a unique faceted design for increased viewing angle. Pre-taped with automotive-grade tape and sealed with military-grade RTV. Strips have 36" copper wire and are 0.34" W x 0.30" H. Sold each.

An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L. An integrated light bar containing 10 amber left and right turn signal LEDs, plus 20 red run and brake dual-intensity LEDs. Features a smoke-tinted tube and measures 5.7" L.

Designed to wrap around forks for 360° of coverage, operating as running lights and/or turn signals. Mounts with 3M™ automotive-grade tape and does not require fork dropping. Features amber LEDs in a choice of amber or smoke tubing. Sold in pairs. NOTE: May require a load equalizer if used as turn signals.

Wide-angle super-bright LED clusters. Each cluster has three wires (low, high, ground) and can be used as single or dual intensity. Sold each.

A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features overcurrent, thermal, short circuit, and reverse wiring protection. 84W, 12V system. Works with LED or incandescent bulbs. Dimensions: 2.25" L x 1.25" W x 0.5" H. A universal brake light flasher with 10 user-selectable flash/strobe patterns. Features...

12V horn emits loud (113 dB) signal. 4" diameter; universal mount. Sold each.

4" H x 7" W mount that includes dual rubber gaskets, allowing the angle of the mount to be raised or lowered as needed. Includes all necessary mounting hardware. Fits most models with the license plate mounted to the fender above the taillight. 4" H x 7" W mount that includes dual rubber gaskets, allowing the angle of the mount to be raised or...

Die-cast housing with a smooth finish. 1.20" diameter housing with overall length of 3". Feature impact-resistant lenses in various colors. Single-function lighting, available in LED or conventional 12V/10W bulb styles. For replacement bulbs, see pages 581-588. Sold in pairs. NOTE: Not DOT compliant.

Clean, custom design of a favorite look. Lens bezel features no visible hardware. Light measures 1 1/2" in diameter and is 2 1/2" long with a 5/16"-24 mounting bolt or stud mount. Includes dual-filament 12V bulb. Sold in pairs; includes amber and red lenses. Clean, custom design of a favorite look. Lens bezel features no visible hardware. Light...

Die-cast eagle fender ornaments in two different sizes. Small measures approximately 1 1/2" tall; large is approximately 2 1/2" tall. Available as chrome with gold beak and eyes, or chrome with gold beak and eyes that light up. Fits most front fenders; includes gasket and mounting hardware. Sold each.

12V, #73-style. Approximately 0.750" L x 0.200" diameter. Clear, 1.4W, single-filament. Sold in 10 pk. to dealer. 12V, #73-style. Approximately 0.750" L x 0.200" diameter. Clear, 1.4W, single-filament. Sold in 10 pk. to dealer.

CNC-machined aluminum with a chrome finish. Dual-function design with LED. Accepts most 4" x 7" plates. Includes rubber mounting block and hardware. Fits most fenders (except bobbed fenders). CNC-machined aluminum with a chrome finish. Dual-function design with LED. Accepts most 4" x 7" plates. Includes rubber mounting block and hardware. Fits...

Miniature chrome marker lights feature bottom-mount universal brackets. Round lights dimensions: 2 1/4" L x 3/4" H. Includes red and amber lenses. Sold in pairs. Miniature chrome marker lights feature bottom-mount universal brackets. Round lights dimensions: 2 1/4" L x 3/4" H. Includes red and amber lenses. Sold in pairs.

For Drag Specialties handlebar end marker lights. Clear, single filament, 12V, 23W; sold in 10 pk. to dealer. For Drag Specialties handlebar end marker lights. Clear, single filament, 12V, 23W; sold in 10 pk. to dealer.