Emergency road flare with white LED center flashlight and eight red LEDs. Features 3 emergency light modes, a built-in metal hook for standing or hanging, and a magnet on the back for attaching to metal surfaces. Polycarbonate lens. Operates in temperatures between -20 to 60 °C (-4 to 140 °F). Emergency road flare with white LED center...

Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm wide housing, wire length is 21.5". Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm...

1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs. 1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs.

112 dB, 500Hz lightweight horn is easy to install. Perfect for limited-space applications. No wiring harness is required. 112 dB, 500Hz lightweight horn is easy to install. Perfect for limited-space applications. No wiring harness is required.

Super-lightweight, powerful 112 dB at 2.7A horn. Features a weather-resistant cover. Easy installation with included instructions. No wiring harness required. Super-lightweight, powerful 112 dB at 2.7A horn. Features a weather-resistant cover. Easy installation with included instructions. No wiring harness required.

Popular for mounting license frames. Single-function LEDs with a chrome bezel. Self-grounding, single wire hookup. Mount with single 6 mm stud with nut. Sold in pairs.

Include three super-bright single-function or dual-function LEDs. 1 1/8" bezel is stainless steel. Simple two-wire hook-up. Mount in a 3/8" hole with included rubber grommet. Sold each.

6000K daylight-white light beams with no yellow or blue tint. 12000 lumen total output (6000 per bulb). Rated for 30,000 hour service life. Sold in pairs. 6000K daylight-white light beams with no yellow or blue tint. 12000 lumen total output (6000 per bulb). Rated for 30,000 hour service life. Sold in pairs.

With an output of 118 decibels, these electric horns are among the loudest on the market. Easy bolt-on replacement and electrical hookup for most bikes. Set includes two horns (one high and one low tone), mounting brackets and installation instructions. Horns measure 3" x 3" x 3" each.

Protects light-duty OEM wiring and switches (horn button) from damage when adding accessories that draw high amounts of current. Strongly recommended for use with all dual electrical horn systems. Also works well with driving lights; waterproof and vibration-proof. Protects light-duty OEM wiring and switches (horn button) from damage when adding...

The standard for LED DOT compliant driving lights, these 3 1/2" dual CREE LED driving lights are 6000K color bright and provide up to 1,400 feet of light. They feature a built-in satin black visored bezel and shallow depth. Kits include all wiring, relay, illuminated switch and hardware.

Dual CREE LED driving lights that illuminate over 1,000 feet ahead with 6000K color bright light. Feature a built-in visored bezel and shallow depth. The kit attaches to existing lower fairing mounting holes with included hardware and also includes a separate wire harness to isolate the circuit.

Provides a quality 5-wire to 4-way flat trailer connection. Color-coded wires. Designed to universally fit the bike or vehicle of your choice. Provides a quality 5-wire to 4-way flat trailer connection. Color-coded wires. Designed to universally fit the bike or vehicle of your choice.

LED marker lights designed for the Can-Am Spyder RT saddlebags to enhance style and visibility. Sold in pairs. LED marker lights designed for the Can-Am Spyder RT saddlebags to enhance style and visibility. Sold in pairs.

Satin black LED switch block assembly. Easily control auxiliary driving or marker lights. Satin black LED switch block assembly. Easily control auxiliary driving or marker lights.

Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Splices into the existing turn signal system. Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Splices into the existing turn signal system.

A plug-and-go electronic fuse block designed specifically for the Can-Am Spyder RT 20-24. Features eleven terminal tie-in points protected by nine separate relays and fuses. Includes connections for turn signals, running lights, brake lights, always-on, and keyed power. Comes with a sub harness with OEM connectors for seamless connectivity. A...

Plug-and-go electronic fuse blocks featuring eleven terminal tie-in points electronically protected by nine separate relays and fuses. Includes connections for turn signal, running lights, brake light, always on and keyed power. The entire system is protected by a 20A fuse and a separate 30A relay to isolate accessories. Comes with sub harnesses...

Replacement bulbs for a variety of uses. Sold each.

The best way to reduce or eliminate this expensive replacement is by covering headlights and fog lights with a durable LampGard™ to absorb foreign object damage. Held in place with heat-tolerant hook-and-loop fasteners that are easily removed for cleaning. Sold in pairs. Made in the U.S.A. The best way to reduce or eliminate this expensive...

Improved LED fog light set includes two high-intensity LEDs that increase the candela output from the existing reflector by positioning the LEDs for maximum brightness. These driving light kits update the lower cowl cornering lights into true driving LED fog lights. Plug-and-play wiring connects to existing OEM wiring harness.

Disperses beam low, wide and far for increased visibility in rain and fog. Rubber isolation bushings provide a stable, vibration-free light. Bezel was designed to provide wider and longer photometric for a safer ride. Includes OEM-style matching switch and plug n' go wire harness. Vertical adjustment is available for proper positioning. Sold in...

Incorporates three rocker-style switches with amber LEDs. Offers convenient control of auxiliary driving, fog or marker lights. Specifically designed to fit the OEM master cylinder for a clean, integrated look.

Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black mounting brackets, switch, relay, wire harness, wire ties, and necessary hardware. 10 mm mounting hole allows easy mounting of most lights with bolts up to 3/8". Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black...

A variety of LED marker lights for specific motorcycle models, including mirror marker lights, fender marker lights, and dual-function marker lights.