Full-coverage 8" handlebar grips that cover both handlebars and hooks for a comfortable, clean-looking, constant-diameter grip surface. Designed to slide over the handlebar and hook after stock grips are removed. Manufactured from a dual-compound rubber for a soft, nonslip surface with excellent grip. The smaller-diameter gripping surface provides...

Constructed of 3/16" steel. Mounts are metal bead blasted before they are powder coated black for the best possible finish prep and supreme durability. Easy to install. Roller fairlead, winch, and fairlead bracket not included. Made in the U.S.A. NOTE: This mount requires a roller fairlead bracket.

A 60" universal plow system that includes a universal hybrid mount, 60" blade, and push tubes. Features a 14ga steel blade, powdercoated finish, and adjustible heavy-duty skid pads.

An 80-inch wide V-plow for UTVs, featuring a steel structure with a replaceable poly face, dual curvature for moving snow, and adjustable height skids. Made in the U.S.A.

Mount converts the 3" x 4.875" standard 4-bolt mounting pattern and allows it to work with most 2-hole mounted winches with a 3.10" bolt pattern. Complete installation instructions and all mounting hardware included.

Replacement lift arm of Grade 50 steel construction. Shot-blasted and powdercoated black for durability. Made in the U.S.A.

Extends ATV/UTV blade 5.32" forward. Constructed of heavy-duty 1/4" grade 50 steel and shot-blasted before being powdercoated black.

10ga matte black powdercoated cover kit. Includes black mounting hardware. Sold as a pair.

Constructed of 3/16" steel. Metal bead-blasted before being powdercoated black for best possible finish prep and supreme durability. Easy to install. Requires fairlead bracket. Made in the U.S.A.

A stiffener kit for use with the KFI 50" flex blade (PART #4501-1120, sold separately). It adds 8.4 lbs. to your flex blade. Made from 10ga grade 50 steel, it comes powdercoated black and includes hardware. Made in the U.S.A. NOTE: Drilling required for installation.

Designed for use with KFI UTV straight blades with a single hydraulic actuator. This kit includes OEM PART #S ACT-HR, ACT-HR-HAR, and ACT-HAR. It controls the winch for raising and lowering the plow system, and a single hydraulic actuator for angling a straight blade. The remote features a KFI logo backlit in blue when plugged in, a threaded...

A replacement lift cable for manual lift systems, used with plow mounting hardware.

Replace your old, broken, or outdated pulley bracket with this upgraded version. It is designed to keep your cable from coming off of the pulley and breaking. Features a quick and easy install and a powdercoated black finish.

Designed to work with 2- and 4-seat Arctic Cat Wildcat and Yamaha YXZ1000 models.

A dash-mounted rocker switch designed for use with the KFI plow hydraulic actuator (PART #4501-1126) and OEM PART #ACT-HAR (not included). This switch operates a single actuator (PART #4501-1126). Pro-V plow systems will require two of these kits. NOTE: Does not work with the wire harness hydraulic actuator PART #4501-1120 (OEM #105940).

Designed to allow you to use your Sportsman winch mounts and plug-n-play winches with the Polaris 570 front bumper. Constructed of 10 grade steel, metal bead-blasted and powdercoated black for durability. Works with all Polaris OEM brush guards and double tube bumpers. Easy to install with complete instructions and mounting hardware included....

Designed for use with the KFI Pro-V Plow System, this kit allows you to manually angle your Pro-V Plow System with the included angling tubes. Can be used in place of the hydraulic actuator PART #4501-1126.

Kit includes hardware kits, lift hook bracket, plow springs, pitch bushings, and hitch pins needed to attach the tube system to the blade.

This harness consists of wires, connectors, protective sheathing, and insulation to provide secure and reliable connections within the hydraulic actuator system. It is specifically designed for use with KFI hydraulic actuator PART #4501-1126 and includes a complete wiring kit with a Carling Technologies two-way dash rocker switch, which is not...

A replacement blade foot designed to work with the KFI Sno-Devil plow. Made from 1/4" grade 50 steel and is zinc-plated. Hardware is not included.

A replacement rod end linkage with zinc-plated steel construction. It is designed for the KFI manual lift PART #4501-1106. Made in the U.S.A.

Standard replacement ear for the PRO 2.0 Square Tube. Made from Grade 50 steel and powdercoated black. Sold as a set of two (both sides included). Mounting hardware included. Made in the U.S.A.

This kit works with UTV push tube PART #4501-1004 (sold separately). The locking pin comes assembled in the kit. You must reuse the original hardware. Drilling is required for installation. Made in the U.S.A.

This lever lift repositions the lift attach point to help reduce winch and cable strain from lower mounted winches and bad cable angles. It is fully adjustable for multiple angles and attach points. Designed to work with KFI UTV push tubes only and will not work with a plow actuator. Constructed of heavy-duty 3/16" grade 50 steel, shot-blasted,...

Replacement brackets specifically designed for use with KFI UTV tubes and open trail tubes on vehicles with a UTV track extension. These powdercoated tough brackets are made in the U.S.A. and require drilling for installation. Does not include the tube system or actuator (sold separately).