Perfect back-up power solution able to deliver 600A for jump starting vehicles (motorcycles, cars, boats and more), charge USB devices (smartphones or tablets) and offer emergency lighting. Compact and powerful booster rated at 600A (1200A peak current). Up to 20 jump starts in one charge. Designed for gas and diesel engines. Very safe: smart...

The next evolution of phone holders, featuring 15W wireless fast charging for Qi-enabled phones. Made with reinforced nylon construction with adjustable soft-touch fingers. Holds any phone from 2 3/8" to 4" wide and rotates a full 360° for portrait or landscape use. Compatible with all Ciro® ball mounts. NOTE: Be sure to confirm that your phone...

Integrates 15W wireless fast charging into the holder. Features waterproof electronics, a rugged body, and safety guards to protect your phone. The ambidextrous lever can be switched from left or right. It has an adjustable foot base and expandable arms from 2 3/8" to 4" to accommodate a wide variety of phones. Necessary wiring harness is...

Deluxe smartphone/GPS holder with a quick and simple ambidextrous design. Features infinite adjustment with Ciro ball-mount design for a broad range of angle adjustments. Fits devices from 2 1/8" to 3 1/2" wide. Available with or without a built-in USB charger.

Specifically designed for hard-starting, high-performance engines that need extra cranking power. Radial grid technology delivers higher cranking amps and superior performance. Special absorbed glass mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid Pack included. Superior...

Terminals for creating battery cables. Made in the U.S.A.

Drag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as OEM batteries. Rugged and provide more cranking power over standard batteries. Lead calcium alloy reduces water loss and service by 66% compared to standard batteries. Includes anti-sulfation chemical. Kit includes battery,...

High-quality, pure neoprene foam cushion is nonabsorbent and retains its shape even under constant pressure. Cut-your-own kit is ideal for custom battery boxes and custom oil tanks. It fights off vibration, as well as pressure from the lid and strap, keeping battery damage to a minimum. Universal design for use in many applications; color is...

Packs more power, discharges less in storage, and has a longer life than conventional batteries. Spill-proof design and construction have passed vibration and pressure differential spill-proof tests. High performance active material with anti-sulfation additive for superior performance. Features new flush-mount terminal. Factory-Activated...

Premium-quality, maintenance-free battery. Special absorbed-glass mat battery and radial grid for high-cranking amps. Battery seals to prevent water loss. Holds charge three times longer than conventional batteries. Features new flush-mount terminals. Factory-Activated batteries should be charged once a month when not in service.

Specifically designed for high-cranking engines. Superior engineering features include an AGM (Absorbed Glass Mat) design and the industry's highest cranking amps. High vibration resistance. Spill-proof, pre-charged, sealed valve regulated design (unless noted). Batteries include stainless steel hardware. Made in the U.S.A. Factory-Activated...

Factory-Activated, spill-proof design with superior grid and component designs. Offers improved charge recover capability, longer shelf life, improved life cycle performance, and extreme vibration resistance. Part numbers 2113-0322, 2113-0323 and 2113-0324 feature new heavy-duty flush-mount terminals. Part number 2113-0325 has recessed terminals....

Hardware kit for Drag Specialties' batteries PART #s 2113-0209, 2113-0210 and 2113-0211. Kit includes two 'L' shape brass adapter nuts, four 6 x 13 mm bolts, four flat washers and an extra two 6 x 13 mm bolts, plus two flat washers. Hardware kit for Drag Specialties' batteries PART #s 2113-0209, 2113-0210 and 2113-0211. Kit includes two 'L' shape...

A stylish handlebar mount featuring 5 volt/2.5Amp dual USB ports and a 1" ball attachment for RAM mount accessories. Includes a water-resistant safety cap with a built-in switch to prevent power drain. Can be connected directly to the battery and fits 7/8", 1", and 1 1/4" handlebars with included spacers. The kit also comes with a medium size...

Charge your USB-C devices on the move with these adapters. Features integrated rubber charging port covers to prevent damage from dirt and dust.

Heavily walled and adhesive-lined heat shrink tubing to keep splices dry. Works well for battery lugs or aftermarket ignition switch terminals. Comes in 4' lengths and is sold in a 4-pack. Made in the U.S.A.

A universal USB charger that simply plugs into any cigarette lighter port or can be used with a NAMZ Power Port for an additional power source. Essential for keeping devices like cell phones and MP3 players charged on the go. Charging cable not included. A universal USB charger that simply plugs into any cigarette lighter port or can be used with...

Features Rick's original redesign: a single-phase, full-wave system. Includes a modern solid-state rectifier/regulator and a stator. Puts out 25% more power than the stock system and will support a 55W headlight. Also supplies constant power to the bike's battery. Unlike the stock setup, the bike will charge with or without the headlights being on...

Designed with the correct voltage set point of 14V +/- 0.2 for use with Lithium-Ion batteries. Not for use with standard lead acid batteries. Ballistic Performance Batteries are recommended.

Rick's Motorsport original design. Includes both a stator and a lithium-ion friendly rectifier-regulator. Will put out approximately 150W and power a 55W headlight if the bike's rotor has not been compromised. Supplies constant power to the bike's battery. NOTE: This kit is not for use with standard lead acid batteries. The voltage point is set to...

OEM-style alternator assembly. Sold each. OEM-style alternator assembly. Sold each.

12V handlebar-mounted USB charger for MP3, GPS, iPads® and smartphones. Allows the simultaneous use of 2.1A and 1.0A ports. Handlebar clamp attachment fits either 7/8" or 1" handlebar. Socket assembly can also be mounted into a flat panel. 12V handlebar-mounted USB charger for MP3, GPS, iPads® and smartphones. Allows the simultaneous use of 2.1A...

50 cm cable for the SP Connect™ Charging Module and Charging Anti-Vibration Module. Features a weatherproof jack. 50 cm cable for the SP Connect™ Charging Module and Charging Anti-Vibration Module. Features a weatherproof jack.

Vibration-free charging car suction cup mount with magnetic attachment for the SP Connect™ Phone Case. Provides fast inductive charging with 15W of power and features super stable 360° adjustment. Vibration-free charging car suction cup mount with magnetic attachment for the SP Connect™ Phone Case. Provides fast inductive charging with 15W of...

Weatherproof cable for wiring to the motorcycle battery to power your inductive charger. Simply wire the free ends of the cable to the motorcycle battery and connect the USB-C connector to the charging module. Equipped with an integrated voltage converter (12V to 5V/2A). Cable length measures 59". Sold each. Weatherproof cable for wiring to the...