12V electronic-type flasher relays with a maximum of 20A.

OEM-quality front brake light switches.

Features 19" long wires and terminals. Two washers included.

Three-pole, 12V DOT compliant flasher relay that works on both LED and filament bulbs. Includes mounting adapter, ground wire, and wire harness. Three-pole, 12V DOT compliant flasher relay that works on both LED and filament bulbs. Includes mounting adapter, ground wire, and wire harness.

Starter/stop switch for Yamaha OEM #4C8-83975-00 or for other custom applications. Six wires. Wire harness length: 20". Measures 29.3 mm W. Max amperage: 6-amps. Starter/stop switch for Yamaha OEM #4C8-83975-00 or for other custom applications. Six wires. Wire harness length: 20". Measures 29.3 mm W. Max amperage: 6-amps.

Direct replacement starter switch for Honda OEM #35150-KSC-670. Can also be used for universal applications. Includes extra set of terminals. Direct replacement starter switch for Honda OEM #35150-KSC-670. Can also be used for universal applications. Includes extra set of terminals.

Universal applications. Quality equal to OEM. Each piece is in a poly bag with a header card.

Slim, universal-use headlight switch. Includes five eyelet terminals, five bullet terminals and insulator covers. Slim, universal-use headlight switch. Includes five eyelet terminals, five bullet terminals and insulator covers.

Designed to turn off the motor when the rider is unexpectedly separated from the vehicle. Magnetic switch with panel-mount design and clipped coil cord.

Easily monitor engine temperature with a peak recall function that allows you to see the maximum temperature reached. Specifically designed for the Honda Grom 2014-2015 models. Easily monitor engine temperature with a peak recall function that allows you to see the maximum temperature reached. Specifically designed for the Honda Grom 2014-2015...

A simple and reliable alternative to gluing a sensor magnet to a bolt or rotor. Available in a variety of thread pitches and lengths.

Features a larger, higher-quality and easy-to-read LCD display. Can be set to read in mph (0 to 225 mph) or km/h (0 to 360 km/h). Also has odometer, two hour meters, maintenance hour meter for oil change, two trip meters, voltage meter, fuel level gauge and clock display functions. Five backlight brightness settings. Includes gauge, wire extension...

A convenient way to get fingertip control of accent lights and other motorcycle electrical accessories. The cover has three switches, each is rated for 12V and up to 12A. Sold each. A convenient way to get fingertip control of accent lights and other motorcycle electrical accessories. The cover has three switches, each is rated for 12V and up to...

Allows you to monitor your motorcycle charging system with just a glance. Green LED indicates normal operating range of 12.5 to 14.5V. Amber LED warns the bike is not charging. If reading drops below 10V or exceeds 15V, flashing red LED alerts the rider. Simple two-wire connection. Gauge measures approximately 2" x 3/4" x 3/16"; daylight sensor...

An ultra-thin, flexible seat heater designed for easy installation under the stock seat cover of motorcycles, ATVs, and UTVs with a battery. The 10" x 9" carbon fiber heater produces 30W and includes a foam cover, quick-disconnect cable, on/off switch, and installation hardware.

Keyed switch. Red = open, Off = closed. Keyed switch. Red = open, Off = closed.

Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm wide housing, wire length is 21.5". Has 9-pin connector. Functions: headlight on/off, headlight hi/low, directional switch, horn or kill switch, high beam LED indicator. Switch Specs: 28.5 mm...

Universal for both bikes and ATV. Switch can be used for almost any accessory. Switch specs: wire length 20"; width 22 mm. Universal for both bikes and ATV. Switch can be used for almost any accessory. Switch specs: wire length 20"; width 22 mm.

Required for installation of Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a Push In/Out engine switch and momentary 2-pole starter switch with two separate circuits. Includes wiring harness. Made in Italy by Domino. Required for installation of...

Model-specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly. Extra-narrow design is only 26 mm wide. Features a push in/out engine switch and momentary 2-pole starter switch. Model-specific design with prewired connector plugs into stock wire harness. Made in Italy by Domino.

Plugs into stock wiring harness. Plugs into stock wiring harness.

Heavily walled and adhesive-lined heat shrink tubing to keep splices dry. Works well for battery lugs or aftermarket ignition switch terminals. Comes in 4' lengths and is sold in a 4-pack. Made in the U.S.A.

A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws. A marine-grade, key start ignition switch for custom applications. Features a stainless steel knurled jam nut with a polished finish and includes two keys and brass screws.

1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs. 1/4" female quick-disconnect matches OEM that is used on rear brake switches and horns. Sold in 10-packs.

OEM-quality replacement neutral switch. Individually packaged. Based on Yamaha OEM #s: 3GB-82540-01-00, 3MB-H2540-0000, 3GB-82540-0000. OEM-quality replacement neutral switch. Individually packaged. Based on Yamaha OEM #s: 3GB-82540-01-00, 3MB-H2540-0000, 3GB-82540-0000.