Specifically designed for use with the Pulse™ electrical input plug. Crafted with a through-roll-bar design for simple and clean routing to the roof. Eliminates many steps during installation of any Pulse bar type electrical connector.

For use with almost any 7-pin trailer wiring on a vehicle. Seamlessly integrates reverse lights without needing to splice into factory wiring. Plug-n-play install. Comes with a weatherproof DT connector. Works with all Speed Demon lights using a DT end. Works on cars with AMP connectors. Splitter addition (sold separately) will allow a two-light...

Increases visibility with 30W, 3000 lumen driving lights. This compact set mounts on any 1 1/4" engine guard, engine guards and handlebars, and will also work inside fairings or on a light bar. Features anodized aluminum housings and swivel mounts with 6mm bolts. Kit includes lights, 1 1/4" clamps, switch, relay and all wiring. Works on any 12V...

A complete hidden trailer hitch solution for Honda GL1800 Gold Wing 2018-2023 models. The hitch bolts securely to the main frame and is laser-cut from high-carbon steel. Includes a plug-and-play wiring sub-harness that connects directly to the factory taillight harness without splicing.

A kit to move rear turn signals to the license plate mount, available in a black finish. This is often required when installing saddlebags. A kit to move rear turn signals to the license plate mount, available in a black finish. This is often required when installing saddlebags.

The standard for LED DOT compliant driving lights, these 3 1/2" dual CREE LED driving lights are 6000K color bright and provide up to 1,400 feet of light. They feature a built-in satin black visored bezel and shallow depth. Kits include all wiring, relay, illuminated switch and hardware.

Dual CREE LED driving lights that illuminate over 1,000 feet ahead with 6000K color bright light. Feature a built-in visored bezel and shallow depth. The kit attaches to existing lower fairing mounting holes with included hardware and also includes a separate wire harness to isolate the circuit.

Provides a quality 5-wire to 4-way flat trailer connection. Color-coded wires. Designed to universally fit the bike or vehicle of your choice. Provides a quality 5-wire to 4-way flat trailer connection. Color-coded wires. Designed to universally fit the bike or vehicle of your choice.

Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights. Internally routed wiring ensures a clean look. Available in 3 1/2" 55W halogen bulb. Include an on/off switch that can be mounted in a side cover. Cast...

Dramatically increases brightness with the use of better LEDs and reflectors. Daytime running lights remain on even when fog lights are turned off due to a splice in the key switch circuit. Features plug-and-play installation with included relay and provides 6000K light. DOT certified. Dramatically increases brightness with the use of better LEDs...

A pair of die-cast 2 3/8" visored mini driving lights available in Halogen or LED. Includes a pair of 1 1/4" highway bar clamps and comes complete with wiring harness and isolation relay. Available in chrome.

Disperses beam low, wide and far for increased visibility in rain and fog. Rubber isolation bushings provide a stable, vibration-free light. Bezel was designed to provide wider and longer photometric for a safer ride. Includes OEM-style matching switch and plug n' go wire harness. Vertical adjustment is available for proper positioning. Sold in...

Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black mounting brackets, switch, relay, wire harness, wire ties, and necessary hardware. 10 mm mounting hole allows easy mounting of most lights with bolts up to 3/8". Allows you to mount your own lights to the Can-Am Ryker for a custom look. Kit includes black...

Mini LED driving lights with dimmable hi-output 490 LED. Easy no-drill light brackets mount to existing locations under the front frame cowl. Includes all wiring, relay, illuminated switch and hardware. DOT compliant and available in satin black. Mini LED driving lights with dimmable hi-output 490 LED. Easy no-drill light brackets mount to...

Closes the gap the rear fender misses on the 18-19 Gold Wings. Reduces flying debris missed by the fender. Lowers amount of dust and dirt on your bike and trailer. Flat surface allows mounting of accessories and lights. Made from polypropylene. Available in black. Closes the gap the rear fender misses on the 18-19 Gold Wings. Reduces flying debris...

Used for installing Big Bike Parts® saddlebag lights without the Honda OEM wire harness. 4-piece set. Used for installing Big Bike Parts® saddlebag lights without the Honda OEM wire harness. 4-piece set.

LED cross feed prevention harness for single indicator motorcycles. Eliminates cross feed from left to right turn signals when using LED turn signals. Required when using Big Bike Parts marker lights or any aftermarket LED lights as turn signals. LED cross feed prevention harness for single indicator motorcycles. Eliminates cross feed from left to...

Increase road safety and make your Ryker stand out. Impactful, diffused LED display includes running, brake, and sequential turn signal light functionality. Mounts cleanly underneath the Max Mount. Sleek, low-profile design. Plug-and-play harness that requires no wire cutting or splicing and a two-bolt attachment. Can be mounted in either standard...

Allows the replacement of OEM turn signals. Works with 8 mm or 3/8" threaded stud mount in place of OEM turn signals. Sold in pairs. Allows the replacement of OEM turn signals. Works with 8 mm or 3/8" threaded stud mount in place of OEM turn signals. Sold in pairs.

Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8 mm or 3/8" threaded stud mount. Sold in pairs. NOTE: Kit does not include turn signal adapters (sold separately). NOTE: Some cruiser models may need a single LED splitter indicator. Turn signal relocation inserts allow replacement of OEM turn signals with...

Hood hinge mount brackets for mounting lights on automobiles. Hood hinge mount brackets for mounting lights on automobiles.

A holster designed to hold specific Speed Demon flashlights. A holster designed to hold specific Speed Demon flashlights.

A collection of mounting hardware for light bars. Includes cradle mounts for the DRC series and other universal fitment hardware.

Accessories for Speed Demon LED Replacement Bulbs, including anti-flicker modules and resistors.

Instead of an ugly bracket, these fender eliminators complement the style and lines of sportbikes. Molded ABS construction; channeled and louvered for both strength and custom looks. Easy to install. Included universal mounts allow installation of most aftermarket turn signals. Available in textured black or gloss black.