Chrome-plated brackets allow mounting of marker lights on 35 to 39 mm fork tubes. Complete with all necessary hardware; lights sold separately. NOTE: Baron™, Baron Mini and Micro lights or any other light that has a mounting stud will work with these brackets. Chrome-plated brackets allow mounting of marker lights on 35 to 39 mm fork tubes....

High-quality cast aluminum construction mounting brackets. Sold in pairs with adapters.

Complete kit with all necessary parts to install Lucas-style headlight shells. Includes (4) W retainer clips, (1) screw, (1) rim retainer clamp, and (1) 3-prong headlight connector with wiring pigtail. Complete kit with all necessary parts to install Lucas-style headlight shells. Includes (4) W retainer clips, (1) screw, (1) rim retainer clamp,...

A scaled-down version of the 7" Lucas-style headlight shells. This gloss black shell with a chrome rim is complete with a bottom hole for wire routing, a copper ground spade, and wire loom retainers. It accepts most 5 3/4" sealed beam and LED headlights. Uses 5/16"-24 mounting bolts (not included). Requires purchase of Headlight Shell Hardware Kit...

A faithful reproduction of the classic Lucas headlamps from the 50s and 60s. The shell is 6 1/4" deep and measures 6 3/4" between mounting points. It features a bottom hole for wire routing and accepts most 7" sealed beams. Kit includes the headlamp shell, rim, W clips, rim hardware, and wiring pigtail. Uses 5/16"-24 mounting bolts (not included).

Purpose-built from stainless steel and aluminum for great looks and longevity. Features built-in dampening rubbers to help isolate the headlamp. Sold in pairs. Purpose-built from stainless steel and aluminum for great looks and longevity. Features built-in dampening rubbers to help isolate the headlamp. Sold in pairs.

Durable polished stainless steel mounts for easy installation of most side-mount headlamps. Sold as a pair with hardware. Durable polished stainless steel mounts for easy installation of most side-mount headlamps. Sold as a pair with hardware.

Perfect for use with undertail cowls when removing stock set-up. Made from durable steel and coated with a black corrosion-resistant finish. Includes an optional, width-adjustable turn signal bracket. Works well when saddlebags are added and turn signals need to be relocated. Includes mounting hardware. Perfect for use with undertail cowls when...

State-of-the-art, high amperage, plug-and-play wiring harness. Designed to provide hassle-free installation and operation with existing lighting setup. Utilizes a unique connector only compatible with Speed Demon 40" and 50" Hi-Lux 2.0 straight light bars; connector must be removed for a hard-wire installation. Features weatherproof on/off switch...

High-quality undertails that give sportbikes a sleek, finished look. Constructed of ABS plastic and paint colors are factory matched. License plate brackets are included. Some models may require cutting.

Three-pole, 12V DOT compliant flasher relay that works on both LED and filament bulbs. Includes mounting adapter, ground wire, and wire harness. Three-pole, 12V DOT compliant flasher relay that works on both LED and filament bulbs. Includes mounting adapter, ground wire, and wire harness.

License plate mounting bolts in a hex shape with a white LED light in the center of each bolt. Measures 14 mm dia., 28 mm W. NOTE: Not for use where DOT lighting is required. Do not flash; made for continuous light on to license plate.

Can be installed to the original harness, making installation of aftermarket blinkers much easier. Adapting wires work in both front and rear locations. Sold in pairs. Can be installed to the original harness, making installation of aftermarket blinkers much easier. Adapting wires work in both front and rear locations. Sold in pairs.

Plug-in that allows trailer wiring and relay kits to power trailers with a four-wire harness (run/left turn/brake, right turn/brake and ground). A fifth bonus wire is available to provide a fused 12V power supply to the trailer compartment for lights or keyless entry systems. Includes 4-pin flat vehicle connector. Sold each. Plug-in that allows...

Perfect for custom applications when replacing OEM incandescent turn signals with low-draw LED turn signals. They feature a 100W, 6-ohm rating with black anodized aluminum housings for durability and heat dissipation. The kit includes heat shrink butt connectors and typically allows all four turn signals to be replaced with LED lights. For...

A quick, easy bolt-on upgrade for improved visibility at night. Features 3" diameter DOT-approved lights with 1 1/4" diameter mount clamps. For a complete setup, add a simple switch with Kuryakyn Wiring Relay Kit PART #2050-0175.

Stainless steel construction with a 1/2" mounting hole. Sold each or in pairs.

A must-have to make all Kuryakyn Omni LED lighting products plug-and-play for '18-up Honda Gold Wings. This wiring adapter kit supports up to three Kuryakyn lighted accessories and features sealed, high-quality connectors that match OEM connectors. A must-have to make all Kuryakyn Omni LED lighting products plug-and-play for '18-up Honda Gold...

Stainless steel clamps work great for mounting Silver Bullets or other lights on frame tubes or engine guards. Hinged design for easy installation. Mounts securely by using a flat-head screw and the fastener used to attach the accessory. Clamps have a 5/16" mounting hole. Available in chrome (unless noted). All are sold each.

Unique clamping system to ease the process of installing fork-mounted turn signals. Adjusts to fit 39 mm up to 49 mm fork tubes and accepts any aftermarket turn signals using an M8-1.25 threaded stud. Clamps feature cast aluminum construction with foam rubber lining for fork protection. Modern design not typically seen on fork clamps. Unique...

Required to install Kuryakyn rear lighting accessories. Once installed, all plug-and-play rear lighting accessories can be installed with ease. Provides run, turn, brake, and ground wiring connection behind the license plate center panel. Only one harness required. Required to install Kuryakyn rear lighting accessories. Once installed, all...

Wiring harnesses that properly apply the load from trailer lighting directly to the battery, protecting the bike's wiring, relay, and fuses. Available in plug-and-play kits for Honda Gold Wing or as a universal harness.

Kit relocates the stock turn signals from the fender to the license plate area. Works great when installing a set of saddlebags. Sold as a kit. Kit relocates the stock turn signals from the fender to the license plate area. Works great when installing a set of saddlebags. Sold as a kit.

Helps your newly-installed LED lights flash normally.

A rear view mirror set with a black ABS plastic housing and a fully adjustable glass mirror. Features a universal roll bar mount for 1.75" and 2.0" roll bars. Includes a 45W Cree LED light providing a 2400 lumen flood light. Complete with plug-and-play wiring harness and lighted rocker switch. A rear view mirror set with a black ABS plastic...