Constructed of 1/4" steel. Metal-bead blasted before being powdercoated black for best possible finish prep and supreme durability. Includes complete installation instructions and all mounting hardware. Made in the U.S.A.

The Sno-Devil plow system and related replacement components for ATVs. The complete system includes a universal hybrid mount, 48" blade, and push tubes. Requires a winch for lifting.

12" L x 1.20" W. Can be used as a tie down loop. Designed to be used with plow pulleys as an attachment point for your hook.

Constructed of 3/16" steel. Powdercoated black for supreme durability. Includes upper hook attach hole and complete installation instructions. No mounting hardware required. Made in the U.S.A. NOTE: Receiver will fit any standard four-hole winch mount without fairlead flange (3" x 4.875" bolt-up pattern).

Heavy-duty 5,000 lb. winches designed for UTVs. Available in standard or wide spool configurations. Features a 12VDC, 1.22 hp permanent magnet motor, 180:1 gear ratio, and includes a dash rocker switch, 14' corded hand-held remote, and a cable hook stopper.

Heavy-duty UTV winches featuring water-resistant seals, all-metal turn clutch, and a 4,500 lb. rated line pull. Includes a hand-held remote and a dash rocker switch. Available in standard and wide mounting configurations.

Constructed of 10-gauge grade 50 steel. Metal-bead blasted then powdercoated black for supreme durability and the best possible finish prep. Made in the U.S.A.

A comprehensive range of replacement parts and accessories for KFI winches, including remote controls, motor components, steel and synthetic cables, rope sheaths, and hooks.

Constructed of 3/8" steel and powdercoated black for supreme durability. Required with some winch applications for winch and frame clearance. Fits standard and wide bolt pattern. Made in the U.S.A.

A series of tie-downs designed for securing vehicles, featuring various buckle types and S-hooks for safe and efficient transport. All models have an 835 lb. working load limit and are sold in pairs.

A durable 1" wide by 15' long rescue strap that should be part of every snowmobile or ATV tool kit. Features spring-loaded snap hook ends that won't come off during use and a soft loop design to protect paint and chrome. Has an 835 lb. working load limit.

A collection of accessories for securing and transporting recreational vehicles, designed to work with tie-down systems and E-track/L-track fittings.

A durable injection-molded ABS hitch cover with high-output red, white, and blue LED graphics. It fits 1 1/4" and 2" receiver hitches and plugs directly into a standard 4-pin flat connector. A durable injection-molded ABS hitch cover with high-output red, white, and blue LED graphics. It fits 1 1/4" and 2" receiver hitches and plugs directly into...

A chrome trailer hitch ball cover that fits all 1 7/8" and 2" hitch balls. Includes a foam liner to ensure a good fit. A chrome trailer hitch ball cover that fits all 1 7/8" and 2" hitch balls. Includes a foam liner to ensure a good fit.

A complete system of quick-connect mounting hardware for Moose Offroad plows on ATVs and UTVs. The system consists of vehicle-specific bottom mounts, universal heavy-duty push tubes, and optional winch mounts. All components are designed for easy hookup, fast removal, and durability. Made in the U.S.A.

A 7/8" diameter by 20' long kinetic recovery rope with a breaking strength of 22,000 lbs. Comes with a convenient storage bag.

Retracting ratchets allow the strap to be set up in seconds with a push of a button. Straps measure 10'L x 2" W and keep excess webbing secure inside the housing. Working load limit 800 lbs. per strap, breaking strength 2,400 lbs. Sold in pairs. Made in the U.S.A.

Designed to reduce cable wear, especially on sharp angle pulls. Made in the U.S.A.

Ideal for plowing, this strap replaces a steel/synthetic line during the plow season. At 64" of overall length, it features a 1 1/2" wide heavy-duty strap and 5/16" synthetic attachment line. Recommended for use with a roller fairlead, it reduces wear and eliminates winch damage from cable stacking. Utilizes your existing winch hook.

Dimensions: 1" W x 18" L with loops at each end. Use to extend tie-down reach or for added protection. 3,000 lb. assembly strength. Sold in pairs. Made in the U.S.A.

Allow you to attach tie-downs almost anywhere there is an 8 mm or smaller bolt. Break-rated at 2,000 lbs. Large enough to accept 3/8" coated tie-down hooks. Great for attaching tie-downs to triple clamps, truck beds, or trailers. Sold in pairs. Made in the U.S.A.

1 1/2" W x 6' L strap provides ultimate strength and security. Features an oversized, high-strength, rubber-coated hook on one end and a swivel carabiner hook to prevent twisted straps. Weight capacity: 1,850 lbs. Sold in pairs, available in black only. Made in the U.S.A.

V-shaped plow available in 72" and 82" sizes. Features blades that taper up from the center to increase plow capacity, multiple adjustable plowing positions, a strong matte powdercoat finish, and included rubber flaps. Recommended for any ATV/UTV 700cc and up. Made in the U.S.A.

Prevents winch hook from bottoming out, prolonging hook and winch life. Made from rubber with a split design for easy installation.

Impact-absorbing rubber prevents bottoming-out of the winch and prevents hook rattling when not in use. A must-have for preventing minor damage.