A 100-piece assortment kit of solderless wire connectors in a reclosable plastic box. No soldering gun required; the low-heat solder melts with just a heat gun and shrinks the tubing for a watertight seal. Kit includes 40 red (18-22 AWG), 40 blue (14-16 AWG), 10 white (24-26 AWG), and 10 yellow (10-12 AWG) connectors. 100-piece solderless wire...

Plug-and-play one-light wiring harness engineered for seamless integration with existing lighting setup. Perfect for use where 8' wiring may be too long and you don't want to cut/splice wires. Features a weatherproof on/off switch. Designed to provide hassle-free installation and operation. For use with light equipped with a Deutsch (DT) connector.

A powerful line of lights for any situation. Some models can function as floodlights, headlamps, or a power bank for charging a mobile device.

An amplified antenna that combines remarkable reception with installation ease, designed for demanding AM/FM listeners. It includes a 7 ft. cable and measures 14 1/2" W x 7/8" H x 3/4" D. An amplified antenna that combines remarkable reception with installation ease, designed for demanding AM/FM listeners. It includes a 7 ft. cable and measures 14...

Meet or exceed OEM specifications. 100% OEM interchangeable with no modifications needed for installation. Double-sealed housing keeps out dirt. Quality 90/10 copper bushings and heavy-duty needle bearing for longer life. 100% electronically tested and insulated armature. High-quality magnets provide more starting torque. Solenoid features 100%...

Replaces OEM starter flex shaft.

Designed to be used with the OEM starter. Kits include brushes, bushings, bearings, seals and insulators. Some kits also include the brush holder.

Replacement starter solenoids for a wide range of snowmobile models.

A versatile collection of accent light kits with high-power LEDs. Can be hooked-up to any 12V vehicle, with or without a battery. Kits include all necessary wires, fasteners, and mounting hardware for an easy installation. Available in various configurations including rectangular modules and flexible strips.

A rock light system with tough aluminum cast housing and color-changing LED chips. Provides super-bright light with over two million color combinations, 30% brighter than original Rock Lights. Controlled via Bluetooth on a smartphone. Features a daisy-chain design and is expandable up to 10 modules.

Optimized for snowmobiles with large factory knockout holes in the dash. Slips over a rocket switch to fill a 1.70" x 0.830" open dash or pre-scored dash knockout hold. Comes in a 5-piece pack. NOTE: Shown with LED lightbar switch, not included. Optimized for snowmobiles with large factory knockout holes in the dash. Slips over a rocket switch to...

Features a three-row spot beam and recessed flood beams on ends for wide light dispersion. Curved body design fits vehicles better and reduces wind noise. Features a DT connector, IP68 rated Military spec waterproof, and 10 to 32V operating range.

A system of color-changing LED rock lights for all 12VDC systems, controllable via a Bluetooth ProGLOW controller. The system is expandable and includes various mounting and wiring accessories.

Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct 12VDC hook up with no resistor required. Includes 48" of 22-gauge wire covered in black sheathing. Sold each. Great for anywhere you need a spot of light, such as shift lights, dash lights, accent lights, and gauge lights. Direct...

Designed to keep rider safe and more visible when changing lanes. Amber LED, available with smoke lens. Soft control, M8 threading. Dimensions: 105 mm L x 19 mm W x 16 mm D. Sold in pairs. Smoke lens.

Heavy-duty aluminum housing and polycarbonate lens with a 10° curve for maximum coverage and light distance. Features high-performance CREE LEDs, an 8° spot beam pattern, and is water- and dust-proof. Available in black Ops.

Universal ignition coils with single and dual spark plug leads using solid core wire. Check wiring diagram before installing.

Connection accessories for use with GEN-X3 and GEN-X4 heated apparel.

Comfortable 85% polyester, 15% Lycra® liners fit snugly under existing windproof and waterproof gloves or mitts. Heating elements warm the entire length of each finger and thumb. Connects to a 12V power source, providing 27W of heat and drawing 2.2A. Note: GEN-X3 and GEN-X4 are fully compatible.

Designed to be worn close to the body, under an outer jacket and over a thin polyester base layer. Features a mini ripstop nylon shell with a droptail back for improved coverage. Equipped with five Microwire™ heating zones: collar (1), chest (2), and back (2). Includes YKK® zippers and a pre-wired connector for pant liners. A temperature...

Provides up to 8 hours of heat. Made from two-sided pile fleece for insulating properties without weight. The hydrophobic fleece holds less than 1% of its weight in water and retains insulation even when wet. It resists pilling and has a honeycomb design. Core fibers help conserve heat and wick moisture away. Features four Microwire™ heating...

A complete range of power accessories and components for Gerbing heated apparel. Includes replacement batteries, temperature controllers, chargers, harnesses, plugs, and extension cords to power and customize your heated gear setup.

A breathable and durable vest made with four-way stretch softshell fabric, bonded to a fleece lining, and featuring a DWR water-repellent finish. It provides up to 8 hours of continuous heat from four Microwire™ heating zones: chest (2), back (1), and neck (1). Features a battery-integrated temperature controller. Includes a 7V 3,400mAh...

Mounts your Hardline hour meter using your OEM gas tank or frame bolt hole. Works on any Hardline meter housing (old or new generation). Made from aluminum that will not corrode.

Keeps track of important maintenance times for your bike including oil changes, valve adjustments, spark plugs, etc. Includes a log book to record service details. Usable with any gas engine, it records and displays up to 9999.9 hours (total hours not resettable). It attaches with peel-and-stick or enclosed hardware, connects to the spark plug...